Building my own flush tail lights

[Justinswidebody]

I'll see if I can find a two dot solution

Sponsored

 

[ATL_Rubi]

I have these lights also. I'm just not a big fan of the chrome inside and the word LED.

Otherwise I loved that they are proportional.

I've been on an AliBaba kick lately looking to bring a few driving/flood lights over for testing for shits and gigs. I've found that anything with the word "LED" etched somewhere is more often than not, mass-produced and sold by resellers under their own brand.

 

[Justinswidebody]

I've been on an AliBaba kick lately looking to bring a few driving/flood lights over for testing for shits and gigs. I've found that anything with the word "LED" etched somewhere is more often than not, mass-produced and sold by resellers under their own brand.

That is a very true statement. There are a lot of the same options from different vendors for sure.

This version of the tail light is in it's last design phase. It's printing right now, when I get home today, I will do a test on fit. Now that the tail lights are bolted on I feel a lot more comfortable about them.

I will put them through some heat and vibration test.

After that I will start producing them for whoever wants them.

While those are being distributed, I will start on the next design.

So I need to know if people want that to be version with :

1. 1 four inch circle light

2. 3 two inch circle lights

3. Flush style light.

 

[ATL_Rubi]

That is a very true statement. There are a lot of the same options from different vendors for sure.

This version of the tail light is in it's last design phase. It's printing right now, when I get home today, I will do a test on fit. Now that the tail lights are bolted on I feel a lot more comfortable about them.

I will put them through some heat and vibration test.

After that I will start producing them for whoever wants them.

While those are being distributed, I will start on the next design.

So I need to know if people want that to be version with :

1. 1 four inch circle light

2. 3 two inch circle lights

3. Flush style light.

Personally I'm between the (3) two-inch circles, or the flush mount style. Single round is great but the housing itself is so large that it makes sense to use the real estate given for more lights (I like lights)

 

[Justinswidebody]

I ordered 50 tail light connectors for now. They are coming from China, so will probably be here next month some time.

 

[SPED1]

I'm in lust with the flush Rouge light lol

 

[Justinswidebody]

Personally I'm between the (3) two-inch circles, or the flush mount style. Single round is great but the housing itself is so large that it makes sense to use the real estate given for more lights (I like lights)

I'm thinking the three lights version. I think the flush will be great, but I think they will look a little to plain.....

 

[Joe Gladiator]

any chance youll have on a version that adds the "BS" blind spot?

 

[mstrpoz]

That is a very true statement. There are a lot of the same options from different vendors for sure.

This version of the tail light is in it's last design phase. It's printing right now, when I get home today, I will do a test on fit. Now that the tail lights are bolted on I feel a lot more comfortable about them.

I will put them through some heat and vibration test.

After that I will start producing them for whoever wants them.

While those are being distributed, I will start on the next design.

So I need to know if people want that to be version with :

1. 1 four inch circle light

2. 3 two inch circle lights

3. Flush style light.

?

Nice work - Keep posted on sales!

Have you mounted up a carbon fiber version yet? I feel like those would look nice without paint on the all black truck like yours (and mine)?

 

[Justinswidebody]

any chance youll have on a version that adds the "BS" blind spot?

I'm going to start looking into this. I have to research if it uses sonar to detect a vehicle or what. Figure out what the sonar can penetrate.... And if I can't fit it, maybe relocate it with a special made bracket .

 

[Justinswidebody]

?

Nice work - Keep posted on sales!

Have you mounted up a carbon fiber version yet? I feel like those would look nice without paint on the all black truck like yours (and mine)?

I'll take some pictures this weekend

 

[RudeJeepin]

I'll see if I can find a two dot solution

Maybe no holes, then a person could add anything out there that they want.
Drilling a couple holes, whether 3/4 or 1 1/4 would be easy. Plus there are a number of small surface mount lights that could be used, depending on what one likes.

 

[Justinswidebody]

Maybe no holes, then a person could add anything out there that they want.
Drilling a couple holes, whether 3/4 or 1 1/4 would be easy. Plus there are a number of small surface mount lights that could be used, depending on what one likes.

I will gladly do this for anyone who wants it done this way. Along with leaving two wires to hook into.

 

[Minty JL]

Maybe have me a set in time for my birthday the end of June. I love the set you have on your truck now, completely changes the rear view of the truck.

 

[Justinswidebody]

Maybe have me a set in time for my birthday the end of June. I love the set you have on your truck now, completely changes the rear view of the truck.

I think I can make that happen

I'm sure I can go to the paint store near me and get some gladiator yellow paint too.

Sponsored