Cell phone mount

[Dougstdig]

Love my bullet point.

the 2 empty balls are for a 2nd phone and a tablet. It’s strong enough for my IPad Pro, but I’m going to down grade to a mini for maps and front camera.
I just switched away from my magnet mount because I changed cases and I have an 11 Max Pro, which is non magnetic. Keep in mind they have 2 different sized phone clam or pinch mounts.

when I’m not using the 2 end mounts they make perfect perches.

You can see the right 2 grid screws just to the right of the mount below. This is the one I mount my tablet to. It’s almost right over the dash mounting bolt.

Sponsored

 

[Mopar31898]

My wife had the Bulletpoint in her wrangler and I didn't like it has it has fixed mounting points. I went with kind of a hybrid system and used 67designs trackbar system and then Bulletpoints wireless chargers and add using USB ports to the dash. We used the wireless charger cradle as the other wireless chargers the phones kept falling off when 4wheeling.

67 Designs

Wireless Charger Cradle

I also found this bar that goes all the way across the dash and was thinking about maybe changing to it when I get more accessories.

Anvil Overland Dash Bar

My setup

How did you run the wires for the charger?

 

[DanW]

Love my bullet point.

the 2 empty balls are for a 2nd phone and a tablet. It’s strong enough for my IPad Pro, but I’m going to down grade to a mini for maps and front camera.
I just switched away from my magnet mount because I changed cases and I have an 11 Max Pro, which is non magnetic. Keep in mind they have 2 different sized phone clam or pinch mounts.

when I’m not using the 2 end mounts they make perfect perches.

Is that base secured with 3M adhesive? If so, how do you bolt new things onto it?

Looks great, btw.

 

[WestwallNF104A]

Bulletpoint is super nice, but wow, it's expensive.

You get what you pay for, in most cases.

 

[Dougstdig]

Is that base secured with 3M adhesive? If so, how do you bolt new things onto it?

Looks great, btw.

There’s a subframe which bolts to the dash with 3M on both sides. The top grate screws to the sun frame in 6 places. Additionally, if you choose to do it, I didn’t, the kit comes with self tapping screws to mount on either side of each of the dash mount bolts. …and thanks.

 

[MaximusTX]

How did you run the wires for the charger?

You can check out my build thread where I have it detailed what parts I used and how I did it.
Maximus Build Dash USB Install

 

[Advntrbound]

I went bulletproof, but honestly, it isn't that great. If you remove a mount (from the ball) you better use 2 hands or be ready to find parts that fall on the floor. Both the phone holder and tablet holder are cheaply made, both broke with limited use. I ended up just throwing them under the rear seat. Last week I ran across a tablet holder for a few bucks, so I reinstalled the bulletproof balls and arms. But it just isn't secure enough and the whole thing droops down, regardless of how hard I crank down on the wing nuts.

 

[Idlethunder]

Another vote for Bulletpoint here. I've used mine for over two years with the clamp style phone mount. My phone for the first year and a half was an iPhone pro max and now have a Pixel Pro. Both big phones and it's been rock solid on road and off.

 

[Gvsukids]

But it just isn't secure enough and the whole thing droops down, regardless of how hard I crank down on the wing nuts.

Did you use the tool they included? Mines held up very well on the dunes and in the woods.
@Off-roading RN
10% off Labor Day code and free economy shipping. "LABORDAY24"

 

[The Sigma]

Another thumbs-up for Bulletpoint from me. Super solid mount; I use it to hold my mic and radio (via the cellphone attachment).

 

[MassAppeal16]

Anyone using these on a 24 model with the larger screen? Worried it is going to get in the way of seeing the screen.

 

[Advntrbound]

Did you use the tool they included? Mines held up very well on the dunes and in the woods.
@Off-roading RN
10% off Labor Day code and free economy shipping. "LABORDAY24"

What tool are you talking about? The "arms" attach to the balls via a wing nut. My fingers are the tool.

 

[Gvsukids]

What tool are you talking about? The "arms" attach to the balls via a wing nut. My fingers are the tool.

https://www.bulletpointmountingsolu...6MRIiKndKGLe7Ez1N7fPwM6b3boYIC0dpG1mfxV-HckGD
Comes included with the mounts. Or a wrench will do the same. Helps with that extra turn.

 

[Advntrbound]

https://www.bulletpointmountingsolu...6MRIiKndKGLe7Ez1N7fPwM6b3boYIC0dpG1mfxV-HckGD
Comes included with the mounts. Or a wrench will do the same. Helps with that extra turn.

Interesting, I didn't get that, might a new item they started to throw in.

 

[xch47cpt]

I've tried every type of mount, and this one that screws into the existing screw on the dash, is the only one that has stayed in place and holds my phone on the worst trails around.

Sponsored