Don't go replacing those batteries just yet!

[ShadowsPapa]

And here's how it's used on various jeeps with various engines -

Sponsored

 

[Idlethunder]

I know that when the CEL (Avengers! Lol) light comes on, everyone's first action is to replace the batteries. Obviously there are a number of things that will initiate a CEL light, but there are a few things that can be quickly checked before you spend $300 - $700 on batteries or $1000+ on a dual battery setup. I made a quick video to show those few things and where they're located. Check it out!

Great video, thank you for sharing! I've read several of your posts on here and watched a lot of your you tube videos but I never put it together that both were coming from the same person. You helped me via facebook email back in August. I had watched your sector shaft brace installation video and couldn't figure out why mine was rubbing the track bar. Thank you again for the time you spend helping others!

 

[tysongladiator]

Great video, thank you for sharing! I've read several of your posts on here and watched a lot of your you tube videos but I never put it together that both were coming from the same person. You helped me via facebook email back in August. I had watched your sector shaft brace installation video and couldn't figure out why mine was rubbing the track bar. Thank you again for the time you spend helping others!

Heyyyy.... I appreciate the comment.

I'm glad that I helped you. I posted a link to a video once to help someone and I was accused of promoting my channel. So, I had to nicely let everyone know that my channel isn't monetized so I don't get paid. I truly make that stuff to help. If I get paid in the future, so be it. But, my main goal is to provide information and help.

So again, thanks for the comment!!! Anything I can ever help you with again, you are more than welcome to send me a message. If I don't know the answer, I'll do my best to get you the answer.

 

[tysongladiator]

And here's how it's used on various jeeps with various engines -

My man. Coming through with the knowledge once again!!!!!?

 

[tysongladiator]

Well....

 

[Charles 236]

As for moving connections on the Z case fuse ( high amp fuse array), the connectors are "keyed" to the corresponding terminal on the fuse array. This is to prevent using a higher amperage fused circuit for a lower amperage circuit, such as a 150 amp fuse for a 80 amp circuit. I add this just to say use caution in bypassing different terminals on the Z case fuse.

Sponsored