Wow!!! I wasnt considering it but the mopar 2" kit looks plenty for the 37s.37x13.50x22 Nitto Ridge Grapplers
22x12 -44 Hostile Rage
Mopar Lift kit
Yeah if you never plan on unlocking the front swayWow!!! I wasnt considering it but the mopar 2" kit looks plenty for the 37s.
Do you know if these are factory wheels....7.5" wide? They look great. Wondering if stock sport s rims (same 7.5" width) will hold a 35 with the mopar lift and still be funtional when articulating. Different backspacing/offset?Here is one w/ the 2” Mopar lift kit and 35’s:
Damn a leveling kit is needed. Bad.37x13.50x22 Nitto Ridge Grapplers
22x12 -44 Hostile Rage
Mopar Lift kit
Dealer installedSo does it come from the factory with the 2" lift or do the tech's at the dealer install it?
So if you get a lift kit, you have to also get a leveling kit? Why doesn't the lift kit have a leveling kit incorporated?Damn a leveling kit is needed. Bad.
It looks like this MOPAR lift lifts the truck all around 2" instead of 2" in the front + whatever in the rear to make it level. This keeps the sink bug look. I personally prefer my truck to sit level. Usually on most pickups this is done with X size lift in front and Y (smaller) size block under the rear leaf springs. But with the JT using rear coils I'm not sure if you would then need a coil spring spacer to add to the front to level it out. Its seems like that, and would result in more like a 3" lift when done.So if you get a lift kit, you have to also get a leveling kit? Why doesn't the lift kit have a leveling kit incorporated?
Do we know for sure whether or not there's rub with the Mopar lift, 37s, and disconnected sway bar?Yeah if you never plan on unlocking the front sway
Ok, I found that they are black rhino wheels. What size tires?