Texas_Gladiator
Well-Known Member
STILL waiting for my SV4's from HR, but just saw this and thought some folks might be interested... new reverse LED's....
Sponsored
Holy big reverse bulb, awesome! but damn $90,STILL waiting for my SV4's from HR, but just saw this and thought some folks might be interested... new reverse LED's....
Yeah, IDK. But I ordered em lol.Holy big reverse bulb, awesome! but damn $90,
https://headlightrevolution.com/2019-jeep-gladiator-jt-led-reverse-bulbs-1000-lumen/
and the other lights, https://headlightrevolution.com/2019-jeep-gladiator-jt-led-rear-turn-signal-upgrade-kit/
i think i'm just going to rock my $15 amazon ones. https://www.amazon.com/gp/product/B072FHNZKW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 i don't think those other bulbs will be $75 better.
I dont know about the oracles, but the amazon lights worked just fine on my Max Tow. No tazer required. I do have the rear LEDs with blind spot sensors, though.So I have a max tow sport S with the separate DRL and turn signals. I bought all 4 bulbs from Oracle, I plugged them in annnnnnnnnnd nothing. No turn signals, no DRL, nothing. Do I need the tazer to change the setting? I thought they would work but hyper flash, but they haven’t lit up at all.
I would assume since you have LED tails your system was changed to accommodate that from factoryI dont know about the oracles, but the amazon lights worked just fine on my Max Tow. No tazer required. I do have the rear LEDs with blind spot sensors, though.
Sweet, please let me know how you like those reverse bulbs.Yeah, IDK. But I ordered em lol.
Should have all my lights swapped out with LED's by Tuesday.
Hey did your LED's plug in tight to the connector for the reverse lights? I tried a couple of bulbs from Amazon but they lacked having any kind of locking tab on the connector end of the bulb that plugs into the wiring harness connector so the bulbs would just fall out.Holy big reverse bulb, awesome! but damn $90,
https://headlightrevolution.com/2019-jeep-gladiator-jt-led-reverse-bulbs-1000-lumen/
and the other lights, https://headlightrevolution.com/2019-jeep-gladiator-jt-led-rear-turn-signal-upgrade-kit/
i think i'm just going to rock my $15 amazon ones. https://www.amazon.com/gp/product/B072FHNZKW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 i don't think those other bulbs will be $75 better.
Sooooo, slightly disappointed with Headlight Revolution right now. My first order with them was for the heads and fogs. I ordered the same bulbs as @WXman and that order was on B/O for a month. When they finally arrived, the heads worked great. Got them installed yesterday and working perfectly. But, the fogs don't fit. The collar is too big and won't allow the bulb to fully "seat" into the housing. Called HR, they honestly sounded like they had heard of this happening and said they would send me the correct bulbs. So I am now awaiting those.Sweet, please let me know how you like those reverse bulbs.
I have the LED package and i get flashed all the time by oncoming drivers...and not in the good way!So have stock sport s lighting, I was flashed at least 6 times driving to and from Michigan driving on country roads without high beams on.
What's the deal? Is it cuz the halogens are bright, not aimed properly?
That's odd. Mine popped right in exactly like the factory bulbs. Only change I had to make was inside the vehicle ECU. I turned on "LED" with the Tazer programmer to get the fogs to work properly.Sooooo, slightly disappointed with Headlight Revolution right now. My first order with them was for the heads and fogs. I ordered the same bulbs as @WXman and that order was on B/O for a month. When they finally arrived, the heads worked great. Got them installed yesterday and working perfectly. But, the fogs don't fit. The collar is too big and won't allow the bulb to fully "seat" into the housing. Called HR, they honestly sounded like they had heard of this happening and said they would send me the correct bulbs. So I am now awaiting those.
Fast forward to today, received my reverse and turn/brake lights. Got the brake lights in, no issues at all. But the reverse bulbs don't fit. The square connector on the bulb they sent me is way too big for the circular connector on the housing. So now I am waiting for HR to call me back and see how they are going to handle this one. The bulbs that fit work great, just frustrating to get two sets of wrong bulbs.
Yes, definitely watched the video; that is how I found out about the reverse bulbs. I think I even clicked the link from their video to their website to make the purchase. After re-watching the video today and freezing it on the part that shows the new LED reverse bulb, I compared it to what they sent me, it doesn't even look like the same bulb. And here is a picture of that connector from the new bulb next to where it is supposed to plug in to the OEM harness, no way it fits:That's odd. Mine popped right in exactly like the factory bulbs. Only change I had to make was inside the vehicle ECU. I turned on "LED" with the Tazer programmer to get the fogs to work properly.
Did you by chance watch their latest video on how to install those tail light bulbs? One of those was a bit unconventional, but it goes right in.