Lets see all those Gladiators with lifts and bigger tires!

[ShaunTOR]

2" Mopar lift kit
Maxxis Rzor MT 37's
Dynatrac Prorock 44/60
ARE Cap
KC light bar

Nice setup!

Sponsored

 

[Gliebig]

 

[jj1114]

Just added AEV 2” Spacer Lift with
37 BF Goodrich Tires.

(I had 35’s on it, but decided to go with 37’s).

Fuel Zephyr Wheels

 

[cannonFodder]

17s & 40s

 

[Trauma PA]

2021 JTR
4" Readylift Terrain Flex
5.13s
ARB Diff Covers in red
ZROADZ bed rack
37/12.50/17 Pro Comps (40s in the future)
Fuel Covert wheels
Budget friendly RTT
Body Armor rock sliders
KBD fenders
and
Ridiculous amount of illumination from KC

How do you like the Readylift Terrain Flex lift?

 

[Trauma PA]

First post here....

4" Readylift
37" Nitto Ridge Grapplers
17" Methods

Happy with the Readylift?

 

[shrocks]

Happy with the Readylift?

I have been - very much. It hasn't been tested very hard off-road yet, but very smooth - the Falcons are great.

 

[Rooster71]

2.5"
Readylift
37x12.50r17
KMC Recon
17x9 -12mm offset

 

[Trauma PA]

Just finished installing the 2” mopar lift. Took my son and I 4.5 hours on the lift to install. 37” tires with 17” Mayhem wheels in dark bronze. No alinement, drives a lot better then stock and straight down the road. Tazer got the speedo correct. The 1.5” leveler will be here next week but could not wait. Wheels do not rub at all driving on the street.

Re gear?

 

[Trauma PA]

Got my baby partially done this weeked. Got the 6.5 EVO enforcer kit (all powered coated to match the Sting gray) with Fox Racing reservoir shocks, 5:13 gears, 40x15.5x20 Yokohama Geolander X-MT’s on 20x10 ATX Slab Beadlocks (color matched in stingray), rockslide engineering power steps. This week we have the color matched ARE camper shell going on, KC Pro6 8 light bar going on above the windshield, warn 12k winch, 6shooter remote lighting system, rear bed drawers, rigid 6” lights all around, Tom woods custom driveshafts. Diesel is the ticket, torque after the exhaust and tuning work is ridiculous. We were over 520 in torque to the ground this afternoon.
Truck was amazing on the road today, you’d never know it was any different than before we did anything except that it rides a million times better than factory. Before anything was done I was running 80mph, 2000 rpm, 27 mpg on the highway. Today in the exact same 10 mile stretch I was running 80mph, 2200 rpm, 21 mpg. It doesn’t shake, shimmy or wonder at all. Tires only took about 7ounces per wheel to balance them perfectly. So pleased with all the design and product selection.

Freakin’ beast!

 

[ATX_Jeeper]

2" Mopar lift kit
Maxxis Rzor MT 37's
Dynatrac Prorock 44/60
ARE Cap
KC light bar

Did you add spacers in the front to level it?

 

[Juan]

Did you add spacers in the front to level it?

No I did not. Just the mopar 2” lift kit

 

[Mavrikk]

Hey ya’ll! I’m a new member here. My JT has a 3.5” lift. 1.5” leveling kit, and on 35’s

Hey Ya'll! UPDATE: Got some new pics of my Max tow Gladiator! 3.5" lift with 1.5" spring spacers up front and 3/4" spring spacers in the rear on 35 inch trail grapples. Got some PRP seat covers a couple months ago, and recently added an LED light bar!

I did it!! About a month ago I traded in my 2020 max tow for a certified used 2021 Rubicon with only 8000mi on the odometer. I got a great valued trade in for my 2020 Max tow, I actually came up about $15k so I put that down on the new ‘21 Rubicon. I parted out most of the max tow to put on the Rubicon, and the mods on the Rubicon have already begun… only thing I regret is I should have kept my Baja Boss MT’s and Warn VR EVO!!! New winch and 37’s are coming soon!!

My max tow I traded in:

‘21 Rubicon off the lot:

Lift and tires installed:

 

[HCBTAZ]

Nice Sting Gray!
How would you rate the Nittos vs. the Mickeys ?

 

[castlej]

Looks like we have similar taste!!
17s & 40s

Sponsored