mojave cowl light mount

[noaudio]

ordered a package and the mounts wont fit - any subjections

Sponsored

 

[Jeeperjamie]

I used these mounts and have had them on for over a year. They are still going strong and fit with no issues. Ordered the Hella lights at the same time and both have been great.
Only suggestion I have would be to use a different screw than the one they provide because it has rusted pretty good but that's a $1.15 fix.


https://www.amazon.com/dp/B01M1KUH6...abc_N6S60C6870N13W29BGPZ?_encoding=UTF8&psc=1

 

[MHulsey91]

I used these mounts and have had them on for over a year. They are still going strong and fit with no issues. Ordered the Hella lights at the same time and both have been great.
Only suggestion I have would be to use a different screw than the one they provide because it has rusted pretty good but that's a $1.15 fix.


https://www.amazon.com/dp/B01M1KUH6...abc_N6S60C6870N13W29BGPZ?_encoding=UTF8&psc=1

Looks like you got a Max Tow Sport. I think the OP has a Mojave which has a different hood and the wiper cowl is different as well.

 

[BigC1066]

I ordered a Cowl Mount for a total of 4 Pods the nuts are to short is all so i plan on going to the hardware store and finding some, will have them coated if need be to protect from rest

 

[itsdapk]

75-80mm bolts do the trick.

 

[1OffCraz]

I got a set of these. Pricey for what they are, but they work well, and give a nice clean look.
https://www.quadratec.com/p/rock-hard-4x4/pillar-windshield-light-mounts-jeep-wrangler-jl-rh-90601

 

[yoda13]

Mopar makes some Mojave specific brackets. I do not have the part number handy…

 

[Gl4dy8r]

I got these dual pod Go Rhino mounts from Quadratec and all I had to do was buy extended length screws from the hardware store. I think I ended up with 90 mm length and they fit perfectly.

Quadratec Part #: 97109.2011
Go Rhino Part #: 730231

 

[itsdapk]

Mopar makes some Mojave specific brackets. I do not have the part number handy…

Brackets are fulgy though.

 

[Mac]

Not sure on the Mojave but on the regular JT the OEM brackets come with specific bolts that are shouldered so you are not crushing down the cowl, I bought some aftermarket brackets that came with regular bolts which would have worked but I did not like the way they pressed down on the cowl. I would recommend OEM if they are available.

 

[mx5red]

I’ve never seen anybody say why the Mojave cowls are different..
Is the hood higher or something and it had to match?

 

[yoda13]

I’ve never seen anybody say why the Mojave cowls are different..
Is the hood higher or something and it had to match?

It is a different hood…

 

[yoda13]

Brackets are fulgy though.

Haven’t actually seen them…

 

[itsdapk]

I’ve never seen anybody say why the Mojave cowls are different..
Is the hood higher or something and it had to match?

1" taller.

 

[itsdapk]

Haven’t actually seen them…

Sponsored