My OEM Front Trail Cam install thread

[ecidiego]

I am not entirely sure. I bought, Mopar 6KM36TZZAA Grille then the center section for camera.

2020 thru 2023.....why did you need that? Your old grille bad? Sorry....just baffled.

All i changed was the interior center section and all parts fit.

Sponsored

 

[DailyDrivenTJ]

2020 thru 2023.....why did you need that? Your old grille bad? Sorry....just baffled.

All i changed was the interior center section and all parts fit.

I was pretty dumb founded by it too. No need for you to apologize. If anything, I should say thank you for cataloging this process that I was able to do mine. I just happened to have assortments of plastic rivets for other projects which worked well for me.

The reason I have new grill is because my old grill in matte black is new or 400 miles old. My wife and I liked the body colored grill. So Matte black grill will be unmolestered and maybe sold. The entire grill assembly is new, mail ordered in.

 

[RustyC]

I used the App. I had zero issues. Just remember to make sure changes are completed and saved. I made 3 passes to make sure all the intended changes are made.

Thanks mate, the app connects perfectly, and I’ve saved the current log to Google drive.
Do I need to do each change individually, or can I make all of the changes at once,
Also how do you save once you make changes?
Going to hit this in the morning now, don’t want to add up what I’ve spent, however Australia stopped getting trail cam in rubicons at the end of 2021, and it’s one of the features I wanted most.
Fingers crossed!

 

[ecidiego]

Thanks mate, the app connects perfectly, and I’ve saved the current log to Google drive.
Do I need to do each change individually, or can I make all of the changes at once,
Also how do you save once you make changes?
Going to hit this in the morning now, don’t want to add up what I’ve spent, however Australia stopped getting trail cam in rubicons at the end of 2021, and it’s one of the features I wanted most.
Fingers crossed!

hope there's no BCM fuckery. good luck.

changes are made 1 by 1. there's no save. they just commit.

 

[RustyC]

hope there's no BCM fuckery. good luck.

changes are made 1 by 1. there's no save. they just commit.

I too, am hoping to avoid BCM fuckery,
Thanks for the help

 

[DailyDrivenTJ]

hope there's no BCM fuckery. good luck.

changes are made 1 by 1. there's no save. they just commit.

Not sure how the Windows version works. On my Android version, I made ONE change, let it run and verify before moving on to the next parameter. I found the app doesn't really give clear confirmation of change. Even so, I had to go back on each parameters and made few more changes again because it did not save. Hence making 3 passes to have all the changes and verified.

 

[gazerone]

So I want to say thank you to both ecidiego and DailyDrivenTJ. Both of your willingness to Barney stuff for me and take apart your jeep are what makes this community great. Next question is what hose connects to washer nozzle? Then I’m close.

 

[DailyDrivenTJ]

So I want to say thank you to both ecidiego and DailyDrivenTJ. Both of your willingness to Barney stuff for me and take apart your jeep are what makes this community great. Next question is what hose connects to washer nozzle? Then I’m close.

I posted some photos there.

https://www.jeepgladiatorforum.com/...adiator-rubicon-trail-cam-installation.75779/

The nozzle fits out side then the rest goes from inside.

 

[RustyC]

So programming went smoothly, after about 4-5 hours the forward cam button appeared in apps, and off-road pages, but so far doesn’t open the cam.
Rear cam still blue screen.
I guess I’ll wait till tomorrow to see if it kicks in?
How long should I wait before troubleshooting?
Thanks

 

[DailyDrivenTJ]

So programming went smoothly, after about 4-5 hours the forward cam button appeared in apps, and off-road pages, but so far doesn’t open the cam.
Rear cam still blue screen.
I guess I’ll wait till tomorrow to see if it kicks in?
How long should I wait before troubleshooting?
Thanks

Is your CVPM powered up correctly?
I saw blue screen when there was no signal IE connection issue.

Make sure your rear camera is the NEW camera ordered and connected to the proper part of the CVPM and that CVPM harness is plugged in correctly.

 

[RustyC]

Is your CVPM powered up correctly?
I saw blue screen when there was no signal IE connection issue.

Make sure your rear camera is the NEW camera ordered and connected to the proper part of the CVPM and that CVPM harness is plugged in correctly.

Yep, new camera installed, infotainment now running to cvpm, rear feed also running to cvpm, 5amp fuse showing volts on positive feed, and plugs all pushed in till click.
I made the harness as per jimmy07 pin specs.
I guess next step is to get jimmy07 to make me a harness in case I have made a mistake somewhere.

 

[RustyC]

Yep, new camera installed, infotainment now running to cvpm, rear feed also running to cvpm, 5amp fuse showing volts on positive feed, and plugs all pushed in till click.
I made the harness as per jimmy07 pin specs.
I guess next step is to get jimmy07 to make me a harness in case I have made a mistake somewhere.

Is there any way of checking the cvpm unit for signal and power?

 

[DailyDrivenTJ]

Yep, new camera installed, infotainment now running to cvpm, rear feed also running to cvpm, 5amp fuse showing volts on positive feed, and plugs all pushed in till click.
I made the harness as per jimmy07 pin specs.
I guess next step is to get jimmy07 to make me a harness in case I have made a mistake somewhere.

I made my cable with his spec and it works fine. No disrespect but there is no magic with jimmy07's cable. ?

Post pictures of back side of the CVPM connector and the CAN bus connector as well.

 

[RustyC]

I made my cable with his spec and it works fine. No disrespect but there is no magic with jimmy07's cable. ?

Post pictures of back side of the CVPM connector and the CAN bus connector as well.

You’re a legend!
The positive feed had pulled free of the pin terminal during install.
Rear camera working with an icon for front cam.
Front cam still not online.
I’ll triple check all programming selections tomorrow.

 

[RustyC]

You’re a legend!
The positive feed had pulled free of the pin terminal during install.
Rear camera working with an icon for front cam.
Front cam still not online.
I’ll triple check all programming selections tomorrow.

Can I assume that if rear camera works, the CAN connection is working?

Sponsored