What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[primethios]

MAN i did a ton yesterday and this morning TO Gladys.

I filled the rear holes in the tailgate, took the sport badge off, cut the drain plug carpet plugs out to properly install my floor mats.

I parked Gladys in the garage for the first time......need to organize so all of her can fit, lol. Actually, no I need to build a 3rd stall for a proper work area.

I completed my badass freedom panel customization. If you want to see the whole write up check out this link. Where have you been all my life, Gladys?

I can't wait to see pics with the back installed. Kudos to you for going the extra "fun" of custom fabric and upholstery, if it didn't cost so much that black plaid sample you had would be on my todo list.

Sponsored

 

[Jjsudd]

Installed rough country side steps. 350 on Amazon.

 

[willemlock]

Installed my MaxMate Roll up tonneau cover today. Although it is meant for the Chevy Colorado it fits pretty damn good for $150

 

[rvillano8188]

MAN i did a ton yesterday and this morning TO Gladys.

I filled the rear holes in the tailgate, took the sport badge off, cut the drain plug carpet plugs out to properly install my floor mats.

I parked Gladys in the garage for the first time......need to organize so all of her can fit, lol. Actually, no I need to build a 3rd stall for a proper work area.

I completed my badass freedom panel customization. If you want to see the whole write up check out this link. Where have you been all my life, Gladys?

That looks awesome

 

[Murgatroid]

I'm pretty sure this post was two firsts.
1. "I picked up my Punk'n" CONGRATS!
2. "Came much quicker then I anticipated" BWAAHAAHAA!!! THAT statement has to be the first time said on this forum!

Mine came much quicker than anticipated by 4 weeks. Was told 10 weeks got in 6 weeks.

 

[2020JT40]

She is in the shop right now getting setup. This is the list, her lift was completed today, pics below, the rest is going on over the next couple of days excluding the axels as they are out for a couple of months..

Evolution Offroad stage 4 suspension 4.5 inch lift
Rigid Industries 50" Adapt light bar on the Evo Rack, and a 10" the FCA Bumper hoop, four Rigid POD lights on the four corners of the Evo bed rack
King/Fox Bumpstop kit
King/FOX 2.5 shock package for Jeep Gladiator
Nitto Terra Grapplers 40x13.50.r17
Flashcal for programming options
Evolution Offroad Jeep JT bed rack system
KMC RG1 Wheels
Rock slide engineering Step/sliders with lighted entry and skid guard
Artec Full Belly Aluminum skidplate kit Engine to gas tank
Gen Right High clearance aluminum front bumper
Warn Zeon 10-s winch
PSC Hydro assist steering kit
Currie RockJock70 matched axle set
Includes arb electronic lockers
Currie HD steering kit
Currie Bright Red coated diff covers
Full floating axle design
Currie Big brake kit for 1 ton axles
Slotted and vented rotors
Floating rotor hat design
Red High temp coating
Magna flow High Clearance Exhaust kit

Update, she is almost done. Still waiting on some custom plates for the rack, and fuel/water tanks, plus the axels and bead locks. Power steps with rock slider.

 

[AggieJeep]

I finally broke down and parted with the cash for Rock Slide Engineering steps and got them mounted in the 100 degree heat. I think I’m getting old...

I really like the wide step on top and that it will help mitigate road grime and debris on the sides of the truck. The flat top helps me exit the driver’s seat without dragging my but so much. My 2012 JK needs a bit of upholstery work for just that reason.

 

[Dwosgood]

Brought it home

 

[steffen707]

Update, she is almost done. Still waiting on some custom plates for the rack, and fuel/water tanks, plus the axels and bead locks. Power steps with rock slider.

Can i have your light setup? j/k What lights are those? i think i counted 20 on the roof? Are they all the same beam pattern?

 

[steffen707]

I finally broke down and parted with the cash for Rock Slide Engineering steps and got them mounted in the 100 degree heat. I think I’m getting old...

I really like the wide step on top and that it will help mitigate road grime and debris on the sides of the truck. The flat top helps me exit the driver’s seat without dragging my but so much. My 2012 JK needs a bit of upholstery work for just that reason.

Where is the deployed pic?

 

[AggieJeep]

Where is the deployed pic?

It was too hot yesterday to finish the wiring. Frankly, it was too hot to snap another picture. Dang, I’m getting old. I’m embarrassed to admit I didn’t finish the job in one go. Maybe I should have told a little white lie instead, like, “I ran out of film in my iPhone.”

 

[2020JT40]

Where is the deployed pic?

Check my video, I show them deploying.

 

[Pocono-Jeep]

Installed new tires and wheels plus RC nerf steps.

Tires: Kumho Road Venture AT51's (285/70 R17)
Wheels: Black Rhino Overlands (17x8, ET 30)

 

[2020JT40]

Can i have your light setup? j/k What lights are those? i think i counted 20 on the roof? Are they all the same beam pattern?

Those are the newest lights from Rigid. They change their beam spread based on your GPS speed, tight long distance for high speed, more diffuse for slower speed.. They also change colors.

 

[ffward]

Sponsored