Rock Krawler 3" X Factor JT System

[Rock Krawler Suspension]

That's exactly what it was! I stopped greasing after I read the the zerk fittings were pregreased and "assumed" all the zerk fittings were greased. You know what happens when you assume.....you get squeaks. All better now, thanks!

Fantastic! I love the easy answers.

Sponsored

 

[aw2657]

Fantastic! I love the easy answers.

Any suggestions or recommendations for a 1'-1.5" coil spacer for the front? I have the 1/2" T Flex spacer in the front now and I'm still sitting about 1" lower due to a heavy steel bumper, winch and lights. I don't want it taller than the back but I would like it a little more level than it sits today. Anyone else run a 1"+ spacer they would recommend! Any chance it would change how awesome it rides today?

 

[Rock Krawler Suspension]

Any suggestions or recommendations for a 1'-1.5" coil spacer for the front? I have the 1/2" T Flex spacer in the front now and I'm still sitting about 1" lower due to a heavy steel bumper, winch and lights. I don't want it taller than the back but I would like it a little more level than it sits today. Anyone else run a 1"+ spacer they would recommend! Any chance it would change how awesome it rides today?

https://rockkrawler.com/jt-1-5-inch-front-spring-spacer/

That will replace the correction pads under the front springs and add 1.5" of lift.

You'll want to drill it to accept your bumpstops but it is a nice, simple solution.

 

[MoparMan]

Is anyone running 37” tires on an Overland with this lift?

 

[Membrain]

Fantastic! I love the easy answers.

Just placed my order for this lift with Northridge4x4, all but 3 items available for drop shipping...

Now watching for status on the 4 springs and a set of control arms.

 

[Rock Krawler Suspension]

Is anyone running 37” tires on an Overland with this lift?

I do not have an image of that setup to share. 37's on a 3" lift sport/overland with factory fenders is going to be tight.

 

[aw2657]

Is anyone running 37” tires on an Overland with this lift?

I just installed the lift on my Overland about a week ago. Looks and rides amazing! I did have to add a couple of washers to my steering stops because my tires were rubbing my lower control arms due to the 5”backspacing of my Fuel rims. It’s not bad but I’m thinking of adding 1” wheel spacers just to see.

 

[Rock Krawler Suspension]

I just installed the lift on my Overland about a week ago. Looks and rides amazing! I did have to add a couple of washers to my steering stops because my tires were rubbing my lower control arms due to the 5”backspacing of my Fuel rims. It’s not bad but I’m thinking of adding 1” wheel spacers just to see.

We need those pictures though!!!

 

[aw2657]

We need those pictures though!!!

3" kit with .5" spacer added to the front on an Overland. 37x12.5R20's with 5" back spacing. Front still sit's about an 1" lower than the back with the steel bumper and winch. Looking to add about 1" more to level it out.

 

[jurfie]

Are those the 37x11.5x18s Nittos? Looks awesome.

Edit: never mind...I was able to zoom in to see 37x12.5x20s.

 

[Rock Krawler Suspension]

That looks killer!!!

 

[aw2657]

That looks killer!!!

I forgot to mention....I added a 1/2" coil spacer to the front to make up for the heavy steel bumper and winch. Still has a small rake and I could use at least probably a 1.5" spacer to level it out. Just don't want to affect how nice it rides now by throwing off caster or anything else

 

[MacJT]

Any new word on the 5” set up? I’ve had the three for a while and love it just want to go a bit bigger.

 

[MoparMan]

I do not have an image of that setup to share. 37's on a 3" lift sport/overland with factory fenders is going to be tight.

To piggyback on this, I really want to buy once, cry once with my Gladiator. Are there any plans to make a pro x kit with rear Coilovers as well?

Also with the triangulated 4 link rear welded on, it would no longer allow for a traditional truss. Does this kit essentially function to strengthen the rear axle as a traditional truss would? If not, any plans for releasing a rear link that would indeed double in it’s function as a rear axle truss?

 

[KHam]

@Rock Krawler Suspension

RKS - Just curious, are you all starting to get caught up on your production or still have huge backlog? I had a 6-8 week ETA on the Pro-X Stage 1 lift and I'm about 5 weeks into it. Hopefully you all are doing well up there.

Sponsored