What Jeep Gladiator aftermarket products would you like to see?

[xnavy8or]

We all know that manufacturers look at the boards for ideas, so what do you want to see for your JT? I would like to see a soft camper shell / topper that is easily removable, yet will protect items in the bed when necessary. Side curtains that roll up or are removable would be required.

Sponsored

 

[Ian cj10]

lift , tyres, front bar & winch , remove the rear tub & put a trayback on it so its useful

 

[ZEN357]

Triple/Double Roll Bars!

 

[skotsour]

Tonneau cover that's the same material as the soft top

 

[USAFRecon]

I want to see a rack that bolts to the A pillar goes over the roof and can be connected to a bed mounted rack. Kinda like a ladder rack you see on other pickups. I have kayaks and would like to be able to tote them to the water

 

[homerun]

Soft doors!!! The rest of my list is below, but that is basic stuff that I am sure will be readily available. I really want Best Top to make a set of 4 full canvas doors. I had these for my YJ and they were great. Super light, easy to bring with. They were loud and a real pain in the a$$ to unzip the windows, however they kept you warm and dry if the weather turned.

Rest of my list:
Steel Bumpers
Winch
Full Belly Pan
Upgraded Sliders/Rock Rails
Not sure about lift or tires, probably run stock for a bit
Dakine tailgate guard for my Mt. Bike to hang over.

 

[chrcal14]

Small but adequate lift for 37x12.5s to clear with no rubbing at full flex.

I like the Rock Slide Engineering Step Sliders. JT model please.

Warn Winch... either in Jeep Steel or aftermarket bumper. Like the idea of OEM fog light preservation with good front hook points and consideration for a couple additional off road lights. (this is probably no big thing, quite a few out there presuming the bumpers will be the same as the JL)

My wild hair idea that I haven't explored or thought through enough... rear bumper with tire carrier that obviously doesn't require Wrangler gate attachment. Like the idea of getting the tire out from under the truck, and might be a necessity if 37s won't fit there. Has to go somewhere and would like to keep the bed clear for use. Will need to have consideration for the rear camera and allow rear view visibility over the tire.

 

[Gladiator4Runner]

diesel engine

 

[2020 SCRAMBLER]

Since this has a lower breakover angle with tendency to get high-centered...and drag its tail over ledges on the trail...heavy duty skid plates - especially the resrcsxle to rear bumper area

 

[RedTRex]

lot's of good ideas

 

[MTH]

Ashtrays for the back seats!

 

[Troybilt]

I would like to somehow make the entire back seat area a waterproof, lockable tool box. Color match so it looks good with the top and doors off. If I can't have a two door at least I'll have a good tool box and a truck bed.

 

[KA350]

Small but adequate lift for 37x12.5s to clear with no rubbing at full flex.

I like the Rock Slide Engineering Step Sliders. JT model please.

Warn Winch... either in Jeep Steel or aftermarket bumper. Like the idea of OEM fog light preservation with good front hook points and consideration for a couple additional off road lights. (this is probably no big thing, quite a few out there presuming the bumpers will be the same as the JL)

My wild hair idea that I haven't explored or thought through enough... rear bumper with tire carrier that obviously doesn't require Wrangler gate attachment. Like the idea of getting the tire out from under the truck, and might be a necessity if 37s won't fit there. Has to go somewhere and would like to keep the bed clear for use. Will need to have consideration for the rear camera and allow rear view visibility over the tire.

You have almost all the same ideas I have, but I want a bed rack for my RTT and maybe mount the spare on the side of the rack or in the bed upright. I’ll be towing a trailer and don’t want the tire on a rear bumper getting in the way of the hitch.

 

[2020 SCRAMBLER]

So no Photoshop artists???

 

[Wraith]

So no Photoshop artists???

I plan to throw some things together once we get the high resolution official images

Sponsored