What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[safarjohn]

I recently installed the Clayton 2.5 Overland Plus, Fox 2.0 Shocks, Currentlync Steering System, Falcon 2.2 stabilizer, Dirty Life 17x9 DT-1 wheels and 37” Milestar Patagonia MT’s. I also installed the Alu-Cab canopy which I absolutely love!

Sponsored

 

[aqcjeepGlad]

I really like the quadratec replica wheels. Jeep should have come with those offsets.

I agree!!

 

[Klicht87]

can someone help me out please ?

Are the 2018+ JL and the 2020+ JT rear driver/passenger door windows ( the small part that does not move) the same dimensions ?
Thanks

Yes they are.

Quadratec sells them with the window trim and lists it for both the JL and JT
https://www.quadratec.com/p/mopar/rear-door-glass-seal-glass-jlu-jt.

I had a hard time finding it on oem parts websites so I just googled it and quadratec came up first.

 

[aqcjeepGlad]

Installed Rusty's frame side LCA skids and Rock Hard axle side LCA skids. Need to get longer bolts for the Rock Hard shock mount skids. Rusty's went on very easy, hardest part was painting them really well the last week. The Rock Hard LCA skids went well too and it is nice they include new hardware for those. Tried this early in the week lying on the ground, it was a no go. Today I used the new 1/2 drive Dewalt cordless impact I picked up today. It is Priceless!!

 

[-miko-]

A business out by me used coyote cut outs . and moved them around so as not being in the same place all the time. And it worked !

We use bottle rockets and firecrackers at my folks river house. That has the added benefit of being highly entertaining.

 

[Rusty PW]

Installed Rusty's frame side LCA skids and Rock Hard axle side LCA skids. Need to get longer bolts for the Rock Hard shock mount skids. Rusty's went on very easy, hardest part was painting them really well the last week. The Rock Hard LCA skids went well too and it is nice they include new hardware for those. Tried this early in the week lying on the ground, it was a no go. Today I used the new 1/2 drive Dewalt cordless impact I picked up today. It is Priceless!!

I drove up on my race ramps to give me enough clearance to get my body under the JT.

 

[Proximo]

I recently installed the Clayton 2.5 Overland Plus, Fox 2.0 Shocks, Currentlync Steering System, Falcon 2.2 stabilizer, Dirty Life 17x9 DT-1 wheels and 37” Milestar Patagonia MT’s. I also installed the Alu-Cab canopy which I absolutely love!

Love love love my 37" Pat's. 12,000 miles on em, and still smooth n uhm quietish. Good choice, enjoy

 

[Larry in NC]

Got my tonneau cover installed. I found one that will let me use a bike tailgate mount.

 

[tonywin]

Installed my new KC Era 3s and Voswitch JL400.

 

[Mball488]

Installed my new KC Era 3s and Voswitch JL400.

Looks good! I am on the cusp of purchasing this myself. I have seen very little when it comes to the JL400 install. By any chance did you take any photos of the install itself?. Also are the colors of the switch light changeable?. Any information would be greatly appreciated either in the forum post or PM.

 

[Artsifrtsi]

Just Enter Every Puddle…

 

[tonywin]

Looks good! I am on the cusp of purchasing this myself. I have seen very little when it comes to the JL400 install. By any chance did you take any photos of the install itself?. Also are the colors of the switch light changeable?. Any information would be greatly appreciated either in the forum post or PM.

It was very straightforward. I routed the cable through a grommet in the firewall drivers area and the cable goes up the side inside the dash to the A pillar. No wires are visible. The lights are changeable as well.

The switchbox is just like the other Voswitch models. Took me about 2 hours total to install and hide all the wires. If you do purchase it, feel free to message me if you have any issues.

 

[Mball488]

It was very straightforward. I routed the cable through a grommet in the firewall drivers area and the cable goes up the side inside the dash to the A pillar. No wires are visible. The lights are changeable as well.

The switchbox is just like the other Voswitch models. Took me about 2 hours total to install and hide all the wires. If you do purchase it, feel free to message me if you have any issues.

Hey I appreciate the quick response. My only other question is. Are the switch colors changeable?

 

[SargeDiesel]

Yes they are.

Quadratec sells them with the window trim and lists it for both the JL and JT
https://www.quadratec.com/p/mopar/rear-door-glass-seal-glass-jlu-jt.

I had a hard time finding it on oem parts websites so I just googled it and quadratec came up first.

Thanks

 

[arskemp]

Got a lightly used rubicon steel bumper + skid plate + some accessories a couple weeks back. Been slowly cleaning it up and taking it apart (man, those tow hooks are a PIA to get out). Once I find a winch, I'll be installing it on my Mojave.

Backyard spray painting the whole thing to cover up the minor scratches already on it (Rustoleum Truck Bed Coating). Will be nice to have a guaranteed paint match as well if (actually, more like when) I scratch it up off road. So far I've gotten the skid plate pretty much done, the brush/grill guard, and have just started the first coat on the bumper itself.

Sponsored