What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Minty JL]

Flag pole mount ........and a bunch of dirt and sod

Sponsored

 

[Phil_R]

Flag pole mount ........and a bunch of dirt and sod

Hey Jeremy,
If you want to take a road trip to Tennessee, I will buy that sod, as long as you keep it watered, for at least $25.00 and to show that I am an understanding guy, I will even lay my garden hose in my driveway so you can drive over it when you back up in my driveway to deliver the sod. Sound like a deal or is my offer to high?
Yur buddy in TN,
Phil

 

[Phil_R]

Did my first oil change at 1,000 miles today. I always do the first change early and the used oil had no speckles of metal at all. Looked good! Anyway, I tried to get close to 1,000 miles and guessed it would be close, however when I pulled in my driveway, it turned out to be right at 1,000 miles exactly! (That will never happen again!) Torqued the oil pan drain bolt to 20 Ft Lbs. and the oil filter plastic cap to 120 Inch pounds or 10 Ft Lbs. I did not want to overtighten the cap and have it crack. 5 quarts of oil later, all is good. At almost 69 years old, as long as I can do my own services, I will.
Do you guys do your own oil changes too?
Pics below

Now time for some "Turtle Tracks" ice cream to celebrate...LOL!!!!!!!!!!!

 

[XJADDICTION]

About to do, install Rubicon Vents on to my Sport Hood… OH THE HORROR! ?

All The Rubi owners will be so upset, a sport JT with Rubicon Hood Vents (install to come soon)! ?

like i said before, my JT identifies as a Rubicon… only better.

 

[XJADDICTION]

This should make y’all happy though, no more Max Tow Hood Decal. She has been renamed by my wife… ?

hood Decals to arrive soon.

 

[Mojave Nunzio]

Put my newest mods on today and she roars like a lion ?

 

[JeepOfTheseus]

Finished the molle panel and GMRS radio install. Wired it up to Aux 4 and used the Rugged Radio mount for their stealth antenna.

 

[Hootbro]

About to do, install Rubicon Vents on to my Sport Hood… OH THE HORROR! ?

All The Rubi owners will be so upset, a sport JT with Rubicon Hood Vents (install to come soon)! ?

like i said before, my JT identifies as a Rubicon… only better.

The factory Rubicon hood and the recessed cutouts those fake vents sit in cover a lot of sin in not seeing the lip edge gaps if any when installed. Installing on a flat sheet metal may show edge gaps on the lips when installed. You might want to mock one up on a piece of loose sheet metal to see if you are satisfied with fit before going for broke on your hood.

 

[ArmyMP]

PRP Seat Covers.

 

[-miko-]

Cleaned all the mud off it from a day on the trails and engaged summer mode. She cleans up nice. I think the kiddos have as much fun swapping the roofs as I do.

 

[Minty JL]

Cleaned all the mud off it from a day on the trails and engaged summer mode. She cleans up nice. I think the kiddos have as much fun swapping the roofs as I do.

Looks great with the steelies too!

 

[Minty JL]

Tell me more about the flag mount! Great idea

For you and everyone else. I took the mount off from my JLUR. I installed some M8 rivnuts and mounted it up. I will actually need to mount it back another inch toward the cab since the pole will not clear my Maxius 3 rack. More pics and updates to follow.

Here is the mount I started with:

https://www.amazon.com/Hooke-Road-W...56------------&vehicleName=2019+Jeep+Wrangler

 

[BLK HOLE]

Now just need to install a battery system in the truck for it.

ok project finished. 50ah battery support.
No slide out at this time. Not wanting to lose my bed cover currently.

 

[NewGladdyOWNR]

Finished the molle panel and GMRS radio install. Wired it up to Aux 4 and used the Rugged Radio mount for their stealth antenna.

which brand is the overhead molle?? Also, which brand is the rocker switch? Thanks in advance!

 

[Raven65]

Installed the Teraflex 1.5” leveling lift on my Sport S (with stock Rubicon take-off wheels/33” Wildpeak A/Ts). Fairly easy job. Definitely makes it easier to leave the wheel on the opposite side that you’re working on… it forces the axle to drop down more on the side you’re working on when you lower it. The lift threw the steering wheel centering off by a couple of inches to the left, so I had to adjust that too - which is VERY easy. Anyway… no more ridiculous rake… looks much better!

Before/after:

During:

Sponsored