What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[TPiz]

Not done yet, but in the final stages of receiving all the parts to install Euro spec rear fog lights. I'll be doing a write up "how to" with part numbers and directions once done. These will replace the stock reflectors in the rear bumper. Still a few unknowns, whether the US spec headlight/foglight controller will operate them without having to replace with the Euro spec controller, and to verify the wiring is already there in stock form, and just adding pins to the existing bumper harness connectors. Hoping to have completed by weekend of the 27th, and have this appear fully factory stock when done.

Awesome. I was going to do the backup lights in the bumper. This is a great alternative.

Sponsored

 

[OVRLND_G8R]

How or what did you use to mount lic plate? same set up on my JTLE. need to mount mt plate

Check out @Maximus-3 website for all their products. They have the one I installed, linked below, as the stealth license plate. And they have a non stealth where it is is straight up and down. Easy install and really well built.

https://maximus-3.com/home/jl-stealth-front-license-plate-bracket-frame

 

[Bennett]

Added my Sunrider and some little plastic door clips. Super happy with both!

 

[Deleted member 24880]

Added my Sunrider and some little plastic door clips. Super happy with both!

Are the door clips you added for anything other than aesthetics? I have seen a few people adding them lately. Thanks!

 

[Bacstar]

Those rhino grip, can you lock them?

I haven't really thought about it or was a concern. I'll only have a shovel on there when I camp or go off-road. Other than maybe a cable lock would work, i can't see any other way.

 

[Bennett]

They cover the torx bolts and give a more finished look. I’m not sure they don’t really protect anything, but they’re aesthetically pleasing.

 

[rafaelsmith]

Added my Sunrider and some little plastic door clips. Super happy with both!

Curious besides "aesthetics" what purpose does the plastic door clips serve?

 

[Jim_n_Tx]

Tailgate with Hauk lettering.

 

[Jzmattingly]

I noticed something a bit weird this week, wanted to see if anyone else had a similar experience?

After driving around town, I was reversing back into my driveway and Thought my reverse lights were really dim. I turned off my truck, had my gf come out, put ignition into on position, had her watch while I shifted into reverse and they were coming on with no issue. Then last night we both noticed my reverse lights appeared dim again, had her watch again before turning it off and found they were not comOmg on. I turned the truck off, turned back on, and retested and they came back on.

The only recent change I’ve made was adding the tazer jl, which I’m currently using for tire change, fogs on with brights, Auto Start/Stop memory, and a few minor settings. Anyone else with a tazer noticing any issues??

I do have a manual transmission, but that shouldn’t really make a difference. If no one else has noticed anything I will Unmarry and remarry to see if that fixes it but wanted to check here first!

 

[Troybilt]

Well I was going to spend my $1,000 check on jeep parts until I seen this

 

[FL Handle Guy]

Mounted the JL rampage California Brief top. It fits perfect until you get to the back, but if you feed some webbing through the bed hooks in the rear and connect the two cinch loops together it fits well enough. I actually really like the look of it but the bed cover is not usable. It should work until a JT version is produced.

 

[one2doo]

Rock slide engineering sliders, mopar 2” lift, synergy steering brace , track bar and jl mini.

 

[Mightytalldude]

I have a whole slew of goodies on order to play with over the next few weeks. Upgrading the standard front incandescent running/turn with LED white/amber units probably Sunday, upgrading the standard rear brake light housings to LED units next week, and finally the rear fog light addition once all the parts arrive.

Work still happens for me (retail), no closure, just modified store hours, plus I'm salaried management, so I'm the last one standing, so to speak. I have year end bonus payout next week, mileage reimbursement for covering another store for the last 4 months, so lots of potential goodies to buy later. I'd gladly take a mandatory 2 week hiatus though.

 

[Proximo]

I have a whole slew of goodies on order to play with over the next few weeks. Upgrading the standard front incandescent running/turn with LED white/amber units probably Sunday, upgrading the standard rear brake light housings to LED units next week, and finally the rear fog light addition once all the parts arrive.

Work still happens for me (retail), no closure, just modified store hours, plus I'm salaried management, so I'm the last one standing, so to speak. I have year end bonus payout next week, mileage reimbursement for covering another store for the last 4 months, so lots of potential goodies to buy later. I'd gladly take a mandatory 2 week hiatus though.

Oh it's coming. Be careful what you wish for. Malls are closing here in Michigan now.

 

[Mightytalldude]

Oh it's coming. Be careful what you wish for. Malls are closing here in Michigan now.

The mall attached to the store I've been covering closed today. Unfortunately, I switch back to my home store in about a week, which is a standalone building.

Sponsored