What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[TheHops]

Did that relay come with the kit? Some of that style qere not meant for 100% duty cycle. I love the dual battery setup. How many amphours is it? What you running the power to. I would love to do a start battery and two lithium Iron phosphate batteries, as house batteries.

Nice! Sounds like a solid setup. I'd be curious to see how it turns out, if you go that route.

It did come as a kit. The whole setup is specifically made for those batteries, so I have no doubt it'll work as intended.

As of right now, it's powering my ARB twin compressor, a 600W inverter, a dedicated 12v fridge port (only used when camping), and an sPOD. On the sPOD, I have 4 sets of LED lights and the switch for the compressor. In the near future, I'll be adding two 10,000lb winches wired direct to the aux battery.

Edit: Sorry, forgot to add that the batteries are 65ah and 850CCA each.

Sponsored

 

[HTXGladiator]

Finally done it:
1.5" Daystar leveling kit
315x70R17 Milestar Patagonia
17x9 -12 Dirty Life wheels.

 

[JT “Charlie”]

These are going on today! Taking a stab at the new(ish) Kenda’s Klevers 35x10.5r17. So far all I have read they have had great reviews! Time will tell.

got them on! Gained almost 2”from My 285/70 falkens. Impressed so far with how they ride on the highway!

 

[jmeyer]

Installed my soft top today. Install was pretty easy. The material needs to break in a little but I’m super excited about this as the weather is getting better here.

 

[Tufelhundin]

@JT “Charlie” looks great! I can’t wait get those on mine. Tall & narrow.

I like em.

 

[DirtyD]

Finally done it:
1.5" Daystar leveling kit
315x70R17 Milestar Patagonia
17x9 -12 Dirty Life wheels.

Saw your post in HJS, looks great! Planning on letting Tom regear and possibly lift mine this summer!

 

[Bbannongmu]

finished up ACE JT Expedition Bumper Install and video

 

[HTXGladiator]

Saw your post in HJS, looks great! Planning on letting Tom regear and possibly lift mine this summer!

Tom is good man....in between being jam packed with work, he's working on getting all his fabrication equipment set back up. I'm planning on ordering coilovers and letting him build my suspension.

 

[Kitfoxbill]

Diode Dynamics Halo installed. Rubicon non led headlights. Full installation in lights.

 

[TheSolarWizard]

Received and installed my Bak x4 Revolver tonneau! Absolutely love the fit and finish, and looking forward to getting my rhino rack on the accessory rails.

more pics please!

 

[TheSolarWizard]

Smartliner got it, put it down, fits Great, like it, Recommended.

would this interfere with molle panels?

 

[cbl1]

Mounted Rotopax on the factory trail rail.

I used the Rotopax Toyota/Nissan adapter - https://rotopax.com/toyota-nissan-truck-plate.html

I'm using the deluxe Rotopax Mount mounted vertical to the plate.

Absolutely perfect fit - and very secure.

Only issue was the bolt that came with it was overly long. I picked up a correct sized bolt (which also was better as it was matching black) at Lowe's …. 5/16-18 x 1 Cap Screw (in the drawer section)

The Rotopax is the 2 gallon which fits perfectly. Will not interfere at all with my Tonneau Cover as well below the top edge of the bed - fairly flush with top of the rail.

 

[Blknblu]

added a Fox front stabilizer shock to compliment my Mopar 2 inch lift. took 10 minutes.

Bruce

 

[Jeepnoob34]

These are going on today! Taking a stab at the new(ish) Kenda’s Klevers 35x10.5r17. So far all I have read they have had great reviews! Time will tell.

You better not let that Frenchie fall off that tire. Probably cost as much as 8 of those tires lmao.

 

[JTzntz]

Smartliner got it, put it down, fits Great, like it, Recommended.

Buzzlb, I also have a few question about your SmartLiner: What is it made of? It it hard or is it a soft foam? Based on pics it's hard to tell. Wondering if it would hold up to the abuse a drop in or spay in liner would? Thanks!

Sponsored