What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Deleted member 30519]

They provide 4 black textured circles that cover the holes.

Nice. I wonder what the weight difference is between it and the stock bumper.

Sponsored

 

[Clendennan]

I added this

The Saga is here
https://www.jeepgladiatorforum.com/forum/threads/builtright-rotopax-an-exercise-in-humility.33972/

 

[Fawkes]

I ordered mine from here: https://yellowbeedesigns.com/produc...020-10x49-inches?_pos=24&_sid=7d7f10e4c&_ss=r But as part of the order I asked for a custom size, 6”x49”. 53” covers the full tailgate width.

Sorry to be a bother. Does that cover the wrap around the taillights too?

 

[Crazy Jeep]

Added the 1/4" aluminum engine and transmission skid plate by @asfir_offroad

This skid plate is an incredible value for one solid piece to cover a vulnerable area.

Super easy install, and perfect fitment.

Just started a thread for those doing some research as there's little to no info out there.

https://www.jeepgladiatorforum.com/forum/threads/asfir-4x4-engine-and-transmission-skid-plate.33876/

Did you buy all 3 skid plates? If so, did you have to drop the gas tank for that plate? Also, how were the instructions that came with it? They do not have instructions on their website.

 

[Cwelroy]

Sorry to be a bother. Does that cover the wrap around the taillights too?

No, it does not. Tailgate portion only. And not even whole tailgate portion.

 

[SloW8]

Installed Kikbax mirrors. Totally satisfied with these. Pop right on, solid, very little mirror vibration. Wife and I love the pegs for hanging a leg out the “door”.

 

[MSGEngineering]

my BuiltRight arrives tomorrow for this exact purpose. Love the Waterport! But from the looks of this, I should have chose passenger instead of driver. Care to share details on how it’s mounted? Thanks!

I bought the universal mounting plate and drilled two of the holes out to 3/8”. Then used some stock aluminum to make a nut for the back of the molle panel. It’s pretty solid. I’ll take a pic tomorrow

 

[troy_brady]

This past weekend I got a great deal on a take-off Rubicon shock/spring set up and received my black hood decal - installed them pretty much immediately and couldn't be happier with the outcome.

 

[DAVECS1]

Ordered my Hydro diesel today and listed my supercharhed Sting Gray for sale. Bitter sweet!

I am intrigued by this move. The diesel power plant will be awesome for sure. I really dig the supercharged 3.6L it is holding its own doing work and off road stuff.

 

[dustanner]

I bought the universal mounting plate and drilled two of the holes out to 3/8”. Then used some stock aluminum to make a nut for the back of the molle panel. It’s pretty solid. I’ll take a pic tomorrow

thanks! I got the rail mount that includes the universal mount hoping I could make it all work without a trip to the hardware store but I’m sure that won’t be the case ha.

 

[W4TVL]

Where did you get the mounting plate from and cost ? Thanks! It looks great as well.

Rock hard 4x4
$184 I think. It’s solid bolted to the frame.

 

[Canadian GP]

This past weekend I got a great deal on a take-off Rubicon shock/spring set up and received my black hood decal - installed them pretty much immediately and couldn't be happier with the outcome.

What rims are those?

 

[nowind]

Installed my BuiltRight rail and Waterport Shower.

how is the waterport mounted to your builtright rail? I want one and was wondering what to use to mount mine inside bed.

 

[kolbjo]

How much for the wrap if you don't mind me asking

I ordered two of these kits because one isn't big enough to go on the tailgate and around the lights, but I should have enough to do the area by the fender vents as well now. So it was about $44 for the vinyl. I also had to buy knifeless tape which came in a kit for about $30 too.

https://www.amazon.com/dp/B01N01YCLL/ref=cm_sw_r_cp_apa_i_xNVpFb6SE916V

 

[Incommando]

Installed the Gator soft tri-fold bed cover. Easy install and seems like a quality part

Sponsored