What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Rollcast]

For the current gear to display on the dash, press the down button on the steering wheel until you get to screen setup. You must be parked to do the setup. Then push the down arrow until you see Current Gear and press the OK. Turn it on, then just exit, and the current gear should display next to the "D" on your dash.

If anyone else finds some cool stuff on the dash setup, chime in!

I dug around and made the change this morning while I was waiting for the kid to get ready for school. Again, thanks for a cool find.

Sponsored

 

[SF_E60]

For the current gear to display on the dash, press the down button on the steering wheel until you get to screen setup. You must be parked to do the setup. Then push the down arrow until you see Current Gear and press the OK. Turn it on, then just exit, and the current gear should display next to the "D" on your dash.

If anyone else finds some cool stuff on the dash setup, chime in!

Great find!

 

[RemodelMonster]

Got it, I have the Bak Revolver X4.

I just installed an X4 and te roll top is a tight fit between the right and left tracks - like not even 1/16" between the aluminum track and the plastic segments that lay down in the tracks. It seems like too tight a fit to be able to install the tonneau adapters under a rack. Can you describe the fit and any problems that you encountered? I'd love to do the same to mine-if I can make it fit.

 

[GladiatorCruzen]

Teaser picture!

 

[oradei]

As America as it gets. Love it but listed in for sale on market place.

 

[Gladiator 2020]

I got jeep to put the TSB new steering box in, now its ..............excellent

 

[Wkyfiregladdy]

Ended up taking my teraflex nexus 2.2 off and reinstalling my stock steering stabilizer.... after a week of driving with it.... my steering had gotten noticeably worse in all 3 settings, reinstalled the stock ss to see if my issue is gone, may stick with stock ss or maybe my gear box is going out we will see

 

[Trlr8tdd]

You know I was going to check that out and I forgot, my helper (wife) was in a hurry to do something else, so I spaced it out until I read your post. UHG... I will be sure to follow up on this after I install the bumper.

I know the mid height rock hard hoop I added to our factory steel bumper allows you to see “around” it, you can see it. I felt the light bar would obstruct too much so I replaced it with small pods, just because there are mounting tabs on the hoop.

 

[SteveInOrlando]

Added custom fabricated filler panels to Steel Rubicon bumper closing the holes in the end.

Actually I have been slacking. This is my first post.

I purchased a Sport S with Manual transmission.

Mods to date:

-Insulated hard top with Sound proof matting and added comfort king headliner. (Love this all the wind noise is gone except from the doors.)

-Installed Rubicon rims with 285 wide tires to fill the wheel well. Provides a much better ride than the stock sport s tires.

-Installed Amp Powerstep Xtreme running boards and the manual override switch to raise and lower them at will.

-All front lights replaced with Factory LED.

-Drop in bedliner installed for hauling gravel and bark mulch

-Front bumper replaced with metal Rubicon bumper.

-Front metal bumper modified to remove the bumps that stick forward in front of the metal.

-Installed custom fabricated panels to fill the voids in the front bumper.

 

[Dewyaw]

I got jeep to put the TSB new steering box in, now its ..............excellent

Mr. Burns reference?


Excellent..........

 

[dickeldan]

Just finished putting the Nfab podium steps on my Mojave. Now my wife and 7 yr old won’t complain about getting in and out.

 

[Gladiator 2020]

Mr. Burns reference?


Excellent..........

Nope, been after them since i got it oct 2019. Then I heard about the Synergy track bar brace ordered it it took forever for it to come in due to the covid 19, and then the t s b came out by Chrysler and I was so lucky I waited to install it now I have a Synergy track bar brace for sale anybody interested

 

[atxatxatx]

Installed the zautomotive front camera today

 

[Kirk_Dirksen]

What phone mount is this?

 

[Acano363]

Installed marker lights front and rear fenders. Easy install no fender removal necessary. Cheap to replace in the future. Mainly going to be used for working the manual discos.

Sponsored