What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[KurtP]

That's a really good way of explaining it! I feel like when I put my 37s on 4.10s the truck just seems heavy and drives hard where as stock it seemed more effortless. Let us know how things go tomorrow.

drive in this morning was great. Held speed on the interstate really well, even without the 91oct tune loaded. I left it on 87 to get a better idea of how it would be for people who are untuned.

@tjbrown23

Sponsored

 

[eyekode]

Added some Rokblokz:

Install was not fun. Pictures were not great and getting the screws to thread in was a real pia. Infact I still only have 5 of 6 thumb screws in after over an hour of attempts.

I do like how they have the cut out for Rubicon rock rails.

I think these pictures would have helped my install:

 

[pannelld20]

Finally completed my build...

Installed the 2” mopar lift, added terraflex 1.5” front spacers and daystar 0.75” spacers on the rear for 3.5”/2.75” of lift. Also added the ram airlift airbags to the rear for when the RTT is on and the bed full of overlanding gear.

what roof rack is that?

 

[RavensEyeOffroad]

Finally got it lined. Took 5 hours, save $20 and pay cash if you can. Have to keep tailgate down for 24 hours too.

 

[Rockabillyroy]

Finally got it lined. Took 5 hours, save $20 and pay cash if you can. Have to keep tailgate down for 24 hours too.

I think that's only if you get the UV protection. I didn't get UV and my tailgate was up when I picked it up. They said that it was not an issue.

 

[Courtsm3]

Mojave shocks front and rear. Rubicon sliders. Fox 2.0 Stabilizer. Teraflex 1.5” front Daystar .75” all done this week. Factory steelies mounted on factory Wildpeak ATs for summer. Morimoto 2stroke 3.0 h13s also installed.

 

[PLEG1972]

what roof rack is that?

I would also like to know

 

[MadMojave]

Mojave shocks front and rear. Rubicon sliders. Fox 2.0 Stabilizer. Teraflex 1.5” front Daystar .75” all done this week. Factory steelies mounted on factory Wildpeak ATs for summer. Morimoto 2stroke 3.0 h13s also installed.

Nice job. Do you kept the plastic skid plate in front? Are you upgrading for a steel skid plate in future? I think one of the reasons Mojave has a steel skid plate in front is to project that particular remote reservoir.
Question: Any reason for put the reservoir facing front-end instead of side?

 

[JT-S-Maxi-IND]

I installed a dune flag with a quick release on the front frame rail. I removed the plastic rivot drilled the hole bigger and welded in a nut. The pole so far has not hit the grill. The flag in from Handy flag. It's collapsible and very convenient

 

[JT-S-Maxi-IND]

I installed a dune flag with a quick release on the front frame rail. I removed the plastic rivot drilled the hole bigger and welded in a nut. The pole so far has not hit the grill. The flag in from Handy flag. It's collapsible and very convenient

How is the Handy Flag pole holding up?
does it survive low hanging tree limbs?
It’s a fantastic idea And I’m thinking of getting one.

 

[kooltoys]

Mojave shocks front and rear. Rubicon sliders. Fox 2.0 Stabilizer. Teraflex 1.5” front Daystar .75” all done this week. Factory steelies mounted on factory Wildpeak ATs for summer. Morimoto 2stroke 3.0 h13s also installed.

where did you get the shocks? install mojave skid plate today to protect shock resi.. cant decide on shocks. Fox pro elite remote resi are like $1300 for the front. looking for a better deal

 

[Jhall1981]

Traded it in on ‘21 Ram BTS Edition.

 

[Gren71]

Traded it in on ‘21 Ram BTS Edition.

how did you do on the trade? and how much a change was the payment? Id be lying if I said I don't think about this sometimes.

 

[RavensEyeOffroad]

Traded it in on ‘21 Ram BTS Edition.

Boooooooo

 

[Summitsearcher]

Traded it in on ‘21 Ram BTS Edition.

Nice truck! But I personally couldn’t part with my Gladiator for a full size truck. I traded from a full size Silverado to my Gladiator and couldn’t be happier. Enjoy your new ride!

Sponsored