What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[brain]

Roger that, It's working great. And, now I've spliced TM plugs onto other equipment to include solar panels, lights, and multi-option chargers.

Sponsored

 

[Ohio JKU]

I added tie down anchors (picture), add some washers and m6 bolts... I installed these Tie down anchors in the bed where the trail rail would be (not optioned on my gladiator)

There are 4 locations under the bed top rail on each side perfect for tie down points.

Note: If you have the bed liner, I took a drill bit just smaller than the bolt threads and cleaned out the hole, and used the bolt the finish clearing out the liner... 8 for 8 it worked. Took 20min +\-

 

[tjbrown23]

I had mine powder coated for 20$ Emblem was free with the fox lift so I didn’t mind paying for it & it matches the red on my dash..Don at pixelsecals did the sticker

That looks pretty cool! I had the Mopar lift dealer installed and never saw the performance parts badge.

 

[Jhall1981]

get the new steering box, fixed my issue.

Did have it done after 3 months of waiting only to find out it was the wrong part. Not waiting another 3-6 months for another part. Cut my losses and move on!

 

[Blade1668]

That looks pretty cool! I had the Mopar lift dealer installed and never saw the performance parts badge.

Not a surprise I bet the parts dept has one or two available for sale now or stuck on a toolbox ?

 

[LordEnzo]

It's really nice "Great" having a portable winch you can use in back of vehicle isn't it.

It is! I prefer winch bumper up front so as not to have as much overhang but the setup works great.

 

[Trlr8tdd]

Added a catch can. If I had to do it again, I would have bought a mishimoto, I have some changes to make to clean it up but it works. I was getting mild spark knock due to oil vapor, it’s now gone.

 

[Blade1668]

It is! I prefer winch bumper up front so as not to have as much overhang but the setup works great.

That's the setup I had on my 90 XJ it's being retired... it's electric gremlins and thrashed transmission. I have the wire to install for the same use on my JT being I have 3 winches on portable mounting plates plus it adds a quick jump starting connection.

 

[Blade1668]

Well on mods to my JT. After hours on phone to locate my topper and driving to the different shipping company docks looking for it.... No fault of RLD or Adventure. I located it, picked up now installed. A note on the white "doors" they have to go...

The concrete block and wood seen in lower part of photo is how I lifted it out of crate and installed it myself. I do still miss my garage and shop house not so much.
I guess the white could match my Scamp some what.

 

[mike921921]

Replaced the factory soundbar speakers with the Infinity's, added some left over sound assasin strips and polyfill - sounds pretty good.

 

[Rares]

Installed Rokblokz XL Long Front only, since that's what's causing my paint chips. $79.85 and about 30 min installation.

 

[AZCooWhip]

Major update day: MetalCloak 3.5" Game Changer Lift, HD Rocksport Steering upgrade, 37" tires on Dirty Life wheels

Damn .... now you’re just showing off. ??? Looks great!

will have to live vicariously through pics like this until first week of March ?

 

[johnparjr]

Installed my dead pedal was able to get my big fat azz in there wasn’t too bad to get done the back nut is the real pain

 

[j.o.y.ride]

Blue scrambler

 

[takeitsleazy]

Got the cap installed just in time to take the boys to the vet

Sponsored