What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[KurtP]

-Fabtech Mojave specific lift installed
-@Clayton Off Road Overland+ CA’s
-Clayton adj track bars
-Synergy drag link and tie rod
-Dana HD ball joints
-rock Jock carrier bearing drop
-rock krawler rear track bar relocation bracket
-AEV geometry correction brackets

At alignment shop now getting toe and caster set. And yes, it rides as good as stock.

Sponsored

 

[mike921921]

Installed the fender trim LED today. https://www.aliexpress.com/item/1005001951041885.html?spm=a2g0s.9042311.0.0.3acd4c4dYh1NEn Connected to turn signal.

 

[Dezerox]

fully loaded gladiator just about but somehow rolled off factory floor without proximity key

Finally got the kit after almost 2 months. I ordered couple days before christmas on the same day I bought my gladiator. Knocked it out today and used jscan to enable.

 

[What's Next?]

Got my wheels and tires installed, Lift should be here in 2 weeks. I also took off the bumper end caps.

 

[Rubi_Rhod]

Installed my 6MT safety device

And nipped that power cord for the GMRS with one of those 12v socket taps.

 

[Alan_Hepburn]

Its things like this that make me glad the army ruined my hearing...if i could hear crisp vs muddy music like this fella does id be even more jeep broke.


Holy crap i just realized the army may have inadvertently saved me money...no way...glitch in the matrix

Strong work my dude! Those boxes look great!

I managed to get 50% service-connected for my hearing issues - the monthly check from the VA covers the payment on the Gladiator!

 

[Gren71]

I managed to get 50% service-connected for my hearing issues - the monthly check from the VA covers the payment on the Gladiator!

Nice!

Im at %44 now, my TBI and back claims are still pending. Good ol’ VA dragging their feet

 

[DrJ]

Installed the fender trim LED today. https://www.aliexpress.com/item/1005001951041885.html?spm=a2g0s.9042311.0.0.3acd4c4dYh1NEn Connected to turn signal.

I can't figure out where to connect these (and I'm handy with wiring). Did you remove the whole fender?

Thanks!

 

[mike921921]

I can't figure out where to connect these (and I'm handy with wiring). Did you remove the whole fender?

Thanks!

Basically:
1) removed a few fender liner fastners (3 x 10mm bolts, 4 pushins, 1 pushpin) to access the front turn signal (already knew the way from previously installing LED bulbs) - no need to remove the fender liner unless you have very large hands ?.
2) used a very long ~24" wire tie to fish the wire through the body (NOT the fender), you'll see a couple holes behind the trim piece
3) tie wrapped the new wire to the existing harness
4) tapped the connections at the turn signal lamp

 

[fun2drum]

Black lug nuts on the stock sport wheels

 

[KurtP]

Lift report:

https://www.jeepgladiatorforum.com/forum/threads/just-lifted-the-mojave.40624/

 

[XraytecH]

Looks Great!!!

The finish on mine was a little blotchy so I plan on hitting them with Crylon Flat Black.

 

[Abnmarine]

I did the same thing. It really is a nice touch.

 

[Abnmarine]

@Abnmarine

I get more guys/gals coming up and asking me where I got those... For sure they are a "nice touch"..

The guy that 3D prints them owns a JL. He's a California guy... So, these are hecko in the USA. 8-)

Good for keeping out the mud, sand, snow, water out of the locks too...

They definitely serve a purpose. I bought them to help with the blacked out look. I also removed all of my Jeep badges.

 

[SelfmodJT]

Midland radio

Sponsored