Lets see all those Gladiators with lifts and bigger tires!

[MattCO]

2" Mopar Lift
35x12.5x17 Wrangler Duratrac
Black Rhino Abrams Wheels 4.54in Backspace (-18mm Offset)
Fab Fours Stubby Front Bumper
Warn Zeon 10-S Winch

Sponsored

 

[Discount Tire]

@MattCO, sweet photos. they they reminds me of Ouray Co. I've had the pleasure of going there many times for the Discount Tire FJ Summit events.

 

[We are in trouble]

Mojave
2' lift mostly Teraflex
35x12.5 Mickey Thompson Baja MTZ
17x9 Black Rhino 4.5bs -12mm offset

 

[KurtP]

-Fabtech Mojave specific springs and bump stops and mojave specific shock extensions
- @Clayton Off Road overland+ control arms, adj track bars, rear sway links
-Rock Krawler rear track bar relocation tower
- Metal Cloak front sway links with disconnect
- AEV geometry correction brackets
- Rock Jock rear carrier bearing drop
- DayStar rear 3/4” spacer
- AEV Dual Sport wheels with 37x12.5r17 Falken Wild Peak AT3W
-Dana HD ball joints & 4.88 gears w/ ARB diff covers
-Fox 2.0 steering damper
-Synergy HD tie rod and drag link

Stable at any speed.

Can drive down the interstate and hit bumps with one tire with only one finger on the wheel and take 25mph off ramps at over 60. I love this truck. Next up: ARB bondi deluxe w/ DD SS3 pro yellow fogs + BD LP9 amber and Timbren bump stops

 

[2021-JT-Mojave]

In the photo of side view in front of the house, was the DayStar rear 3/4” spacer installed at the time of photo? I ask for truck looks level so I would assume the 2" Fabtech kit you used would yield this result and you adding the rear spacer would raise the rear by 3/4? I ask for I'm interested in the Fabtech kit but i want to have my rear slightly higher than front so I'm not looking like an idiot when loaded/towing.

 

[KurtP]

2" Mopar Lift
35x12.5x17 Wrangler Duratrac
Black Rhino Abrams Wheels
Fab Fours Stubby Front Bumper
Warn Zeon 10-S Winch

Man i miss the west

 

[Berber5985]

Hey Ya'll! UPDATE: Got some new pics of my Max tow Gladiator! 3.5" lift with 1.5" spring spacers up front and 3/4" spring spacers in the rear on 35 inch trail grapples. Got some PRP seat covers a couple months ago, and recently added an LED light bar!

What wheels are these? I love the simplicity of these!

 

[TRAILJT]

Rock Krawler 4.5” Pro X
40X13.50R17 Nitto Trail Grapplers
ICON REBOUND 17 x 8.5 -6mm/4.5

 

[PDiddy]

Just a basic bro lift here. 1.5” spacers up front and 3/4” in the rear. Cooper Evolutions MT 35x12.5x17. Stock Rubi wheels.

 

[Tuggernuts]

Mojave
2' lift mostly Teraflex
35x12.5 Mickey Thompson Baja MTZ
17x9 Black Rhino 4.5bs -12mm offset

Gotta say,, I like the use of 35s here. Nice looking rig.

 

[WhiteJT]

20 Max Tow
3.5 RC
37x12.5 Nitto RGs
17x8.5 American Outlaw Lonestars

 

[akguy47]

2 inch mopar lift with fox shocks
35 nitto ridge grapplers
Jeep 17 inch wheels
2 inch billet wheel spacers

 

[lostdd]

4" Ready Lift
17" Black Rhino - Sentinel
37x12.5 Milestars

 

[mellendic]

37x13.5 Toyo Open Country MTs, on a 3.5 inch Metalcloak game changer

 

[KurtP]

In the photo of side view in front of the house, was the DayStar rear 3/4” spacer installed at the time of photo? I ask for truck looks level so I would assume the 2" Fabtech kit you used would yield this result and you adding the rear spacer would raise the rear by 3/4? I ask for I'm interested in the Fabtech kit but i want to have my rear slightly higher than front so I'm not looking like an idiot when loaded/towing.

I just saw this.

The pic above of the driver side is with the 3/4” spacer installed.

Remember the front fender height is different than the rear. So if you are going to judge rake by the fender line, you’ll need a steeper offset of spring height front to rear.

Sponsored