Stock Mojave w/ 37s Thread

[White Bread]

Truck looks SWEET!!!! Love the wheels now, LOL. Are you at stock Mojave height? If so what are your wheel specs? Any rubbing? I'm really liking your set up. Thanks

Yup, stock Mojave height. Wheels are 17x9, -12mm offset. Tires are 37x12.5, and measure nearly dead on 35.5" tall at 28psi. No rubbing whatsoever.

Sponsored

 

[aqcjeepGlad]

Yup, stock Mojave height. Wheels are 17x9, -12mm offset. Tires are 37x12.5, and measure nearly dead on 35.5" tall at 28psi. No rubbing whatsoever.

Thanks a bunch, how much outside of the fenders are you? Looks like a bit but hard to tell for sure in your pics. Thanks again. I'm now leaning heavily toward your set up.

 

[White Bread]

Thanks a bunch, how much outside of the fenders are you? Looks like a bit but hard to tell for sure in your pics. Thanks again. I'm now leaning heavily toward your set up.

I haven't measured it, but it's probably a couple of inches.

 

[dblack222]

37x12.5 K02s
17x9+12 rocktrix RT105
Zero rub in any DD situation, should handle the mall curbs just fine

 

[MOJO21]

Went looking for Wolves today and I can't say enough about how much I love this thing. It crushed though a few feet of snow with little effort. Never rubbed at all.
The smoothest ride I've got.

Man, WOW what a look. I have been looking for a setup sorta like this. I want to stay with the 17 inch rims but with a 9 inch width. I suspect you have a 9 inch with with the -18 offset. How much space from the tire to your shocks and frame?
How much did the 37's drain the power of your engine? Did you do anything like a power module? I have the manual transmission so I won't have the power the auto has. I apologize for the barrage of questions. Trying to gather the knowledge to make an inform decision on an upgrade to my Mojave.

 

[MOJO21]

Falken 37 x 12.5; gunmetal AEV Borah JT/+25mm wheels. No rub at full lock on road.

Kurt,
Those rims with +25 offset are 8.5 wide correct? What back space do they have plus what kind of clearance you have on the truck and components? Thanks.

 

[KurtP]

Kurt,
Those rims with +25 offset are 8.5 wide correct? What back space do they have plus what kind of clearance you have on the truck and components? Thanks.

back spacing can be calculated from specs given. Not sure how much space there was but it wasnt much as stock.

with my current Clayton control arms and lift, i will get the slightest of touch on the control arm at full lock while pressed against the steering lock. It doesnt bother me.

 

[Jonesy22]

Just got them installed

 

[Bjornson]

Edit to prior post. I had rubbing in the wheel well when I hit curbs/large rocks at speed. With 37 Patagonia on stock rims. No rub at full lock though. Only hitting obstacles. I added the aev 2 inch kit, photos below for what it looks like before and after. 4wp installed for $630 and the kit cost $440. Problem solved.

 

[Tuggernuts]

Edit to prior post. I had rubbing in the wheel well when I hit curbs/large rocks at speed. With 37 Patagonia on stock rims. No rub at full lock though. Only hitting obstacles. I added the aev 2 inch kit, photos below for what it looks like before and after. 4wp installed for $630 and the kit cost $440. Problem solved.

Looks great.

 

[Gliebig]

Put my 37 KO2s on a few days ago. I am cheating a little, have an 1” spacer up front, offsets the height I lost from bumper/winch.

Looks great. How tall do the tires measure mounted?

 

[Alanscott_1]

Looks great. How tall do the tires measure mounted?

Inflated to 30 psi, 35.5"

 

[titty_sprinkles]

No rubbing so far

Looks awesome! Care to share details on the wheels?

 

[Bluecifer361]

Looks awesome! Care to share details on the wheels?

I’m sorry honestly don’t even know them other then 17inch black rhino lol

 

[Alanscott_1]

My new wheel/tire combo: Method MR701 with Baja Boss ATs

Sponsored