What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[ColoFreeJeeper]

Installed the passenger side tow hook and bezel kit. What a PITA but at least it’s symmetrical now.

Sponsored

 

[TheJoyceIsYours]

Made up some new decals for the tailgate that don't require camera or badge removal.

 

[Gren71]

Installed the passenger side tow hook and bezel kit. What a PITA but at least it’s symmetrical now.

Any pointers? I have the stuff for this, minus the bezel, and was looking to do it soon.
Also…got a p/n for the bezel?

 

[Deleted member 30519]

Made up some new decals for the tailgate that don't require camera or badge removal.

How does the receiver bolt onto the stock hitch? I've been trying to figure out if I can install the mopar receiver without removing the bumper.

 

[ColoFreeJeeper]

Any pointers? I have the stuff for this, minus the bezel, and was looking to do it soon.
Also…got a p/n for the bezel?

I bought it as a kit but here is the link where I bought it. The Mopar part numbers are there.

https://www.jeepsareus.com/sku/jtreartowhook.html

 

[ospreyfe55]

Finally got around to installing the TeraFlex 1-1/2” front spacer lift and anti-sway bar quick disconnects. Also installed the Mopar 1/4” longer lower control arms.

Lower control arms.

TeraFlex 1-1/2” spacer lift.

TeraFlex anti-sway bar quick disconnects.

Results: Nearly level with a slight rake when measured.

I just ordered the Tera Flex leveling kit for my Rubi Gladiator too, I also ordered the longer control arms. I figured it was perfect timing since I have to have the dealer replace the steering gearbox so they will do an alignment as well. Did you use both the 1" and 1/2" spacers?

 

[ColoFreeJeeper]

.....Did you use both the 1" and 1/2" spacers?

Yes I used both. The 1/2" spacer is above the 1" spacer.

 

[AJ-MJ]

I installed the Metal Cloak Front Axle Disconnect skid plate today. I ran into issues. I had an interference fit with the Hard Rock front Lower Control Arm skid plate that I had previously installed. I had to remove the LCA skid plate and trimmed it and the FAD skid. What a pain, but got it to fit and repainted everything. It just took a lot longer than I anticipated. Tomorrow I'll install the stabilizer relocation kit from Metal Cloak.

 

[NH-JT]

Not necessarily all today, but here goes:

Rock Hard Sliders
Rubi rims
Kenda Klever 35x10.5
Yakima Overhaul w/ 1up side mounted bike rack (off of last JT)
RedArc brake controller
Center console organizer
Plasti Dip - front bumper bezels, trail rated badge , and keyholes
New tailgate badge - limitlessparts.com

 

[NodrogRide]

Installed those pretty, bright, green prerunner grille lights... Only to find out (because I didn't do my homework) that green is just as illegal as red and blue. YAY! FML. Let's see if I can get to work and back without a ticket...

 

[akamax_power]

Installed a Warn 12s winch using the mopar winch mounting plate. I thought I’d make things easy on myself by paying a little more and using the mopar mount to not have to oval the skid plate mounting holes. I didn’t do enough research to realize the mopar mount didn’t come with a fairlead adapter plate so the job isn’t completely done and I get to spend more money.

I ordered the adapter plate and figured I’d get the gunmetal warn fairlead cuz why not

 

[TexasTJ]

Returned from Moab/Ouray.

 

[yushjr]

I cleaned bugs off of the windshield today.

 

[Tuggernuts]

Returned from Moab/Ouray.

Amazing photos!

 

[Tim]

Could you tell me what bed rack brand did you attach above the bed cover? That would be perfect to attach my rods while keeping gear locked up in the bed. I understand to keep my rods from sprouting legs and walking away to use locking snow board racks. It’s been 110 days since placing a white Mojave order. Maybe coming soon.

It's a Max Modular 18" aluminum rack. The tonneau cover is an Access Literider soft rollup cover. I did not use tonneau brackets when I installed the rack and I can roll the cover all the way to the cab, when needed.

I will mount up my ski racks on this at some point when it gets cold out.

Sponsored