What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[ruscopin]

Winter hit and I got bored so I messed with the exhaust again! I swapped out the Dynomax Quiet Crawler Super Turbo Muffler for a MagnaFlow Straight Through Muffler. I recorded sound clips and overlayed the sounds for comparison. Maybe it will help someone else who is bored. Dynomax vs Magnaflow Exhaust Clip. For the film critics, I know it's primitive but should serve its purpose.

Sponsored

 

[NoDoorsNoProblem]

Finished the rear on the Mojave lift today. So much easier than the fronts, both because lessons learned, and because no annoying steering components in the way. Did have to compress the springs using a coilover-type spring compressor though, I had the axles at max droop allowable by the break lines and could not get the springs and spacers in without the compression. Oh, and the extended sway bar end links that AEV sent were garbage. Completely unable to tighten the bolt down on the lower end. Going to have to go to another supplier for those, so currently rocking no rear sway bar. Haven't done anything crazy on the road and can't really tell that its not there.

 

[RU_NOT_IN_2_TRAILS]

Looks great. I’m patiently waiting for my Builtright passenger panels. I see you added them behind the hi lift mount too. Interesting. I may do the same if I need more room.

Thanks! Very happy with my BuiltRight Molle panels!

 

[XraytecH]

Rigged some inexpensive Amazon rock lights to act as courtesy lights when my RSE step sliders deploy.

 

[XraytecH]

Got both front seats done and installed. Heaters are working great. Was able to repair the zipper on the passenger seat. This week I’ll tackle the backs and this will be a done deal.

love the saddle color against the granite crystal

Good to know that Katzkins can be owner installed.

 

[Gren71]

Winter hit and I got bored so I messed with the exhaust again! I swapped out the Dynomax Quiet Crawler Super Turbo Muffler for a MagnaFlow Straight Through Muffler. I recorded sound clips and overlayed the sounds for comparison. Maybe it will help someone else who is bored. Dynomax vs Magnaflow Exhaust Clip. For the film critics, I know it's primitive but should serve its purpose.

Thats is a pretty stark difference, and sounds great!

 

[Onefin]

Drilled 4 holes in the bed floor to mount my ARB element fridge slide.
Also ran the ARB wiring harness to the bed from the engine compartment.
Will wire to battery and finish the wiring in bed tomorrow, it was dark today.

 

[jeepstertim]

Fitted new front LCAs from the Mopar kit to compliment my 1.5" puck lift. 190lb/ft with the JTR on the floor is seriously hard work!

 

[HVYMETL]

DEFINITELY nose high, I'm in a sloped driveway so it makes it look like its a bit level. Here's a picture from the shop floor; it still looked higher in person than in the pictures.

If you want to go level, I'd say 1-1.5 spacer,

Maybe a winch would be the perfect solution? ?

 

[USMC-SSGT]

Fitted new front LCAs from the Mopar kit to compliment my 1.5" puck lift. 190lb/ft with the JTR on the floor is seriously hard work!

Strained multiple muscles on that one.

 

[Markpod7]

Did this last month but added the boom mat headliner…highly recommend!

 

[BLK HOLE]

Preparing for the tent arriving tomorrow. Voodoo Max Mod rack.

Done deal. Test camp run this Friday.

 

[Markpod7]

Got both front seats done and installed. Heaters are working great. Was able to repair the zipper on the passenger seat. This week I’ll tackle the backs and this will be a done deal.

love the saddle color against the granite crystal

Katskinz?

 

[Markpod7]

Installed a Rugged Ridge tri-fold cover. Pretty happy with the fit and quality. Installing the bulkhead bracket was tricky. Having a friend with long, skinny fingers is recommended though.

Good so we want to use tax paying citizens firehouse for our own personal projects?!

 

[Roklimo]

Installed Road Armor side steps and front Rok Blokz. No more rooster tails mucking up the sides.

Sponsored