TexasLEO
Well-Known Member
Sure thing.Thank you!!!!!!
Sponsored
Sure thing.Thank you!!!!!!
Wait so you dont have the led package and were able to plug and play those factory led no problem?Installed factory LED tails. Plug and play easy peasy. Look great. Didn’t even need my tazer to adjust voltage. Got a great deal from a local guy who installed the Oracle flush tails.
![]()
I pulled the trigger on the teraflex drop bracket…my wallet hates me.I have the MPP front LCAs and the brackets i got had two holes. One for 2.5in of lift and one for 3 or 3.5”. I used the holes for 2.5” of lift…that combined with the slightly longer MPP LCAs made for a huge steering improvement
IMO its always easy to get them u plugged. Plugging them back into is the PITAUsed Jscan to update my tire size.
I was expecting it to be a PITA, to get to the secure gateway plugs/wires, but it was super easy. Not sure if Jeep relocated them slightly on the 22 model year, but it was not the nightmare people made it out to be...thank god
I’ve been to the car wash multiple times, I do not wax over them. Very easy install and very durable.With these decals ... do you apply wax over them? Wash the vehicle as normal? Is it safe to go through a car wash or would there be a risk of damaging the decal?
Thanks. I have one of these decals but have been hesitant to put it on (on the hood).
You can drop the cord through a hole on the driver front side of the console. The cord can run along the ebrake and up behind the hvac and radio to the top of dash. My phone mount is a good bit lower so I notched the dash trim so the cord comes out right above the hvac controls.Worked on hiding the wire to my phone. Just have to figure out the best way to get the wire into the center console now.
![]()
Great idea! Looks super clean! After browsing through some YouTube videos, I found one where they ran a plug to the rear seat. After seeing how they removed the back of the console, I ended up going through that way.You can drop the cord through a hole on the driver front side of the console. The cord can run along the ebrake and up behind the hvac and radio to the top of dash. My phone mount is a good bit lower so I notched the dash trim so the cord comes out right above the hvac controls.
![]()
![]()
Love this! If I didn’t have the Willys decals I’d definitely get these.Pulled the trigger on the Subdued Flag graphics from the Jeep Graphic Studio.
https://www.jeepgraphicstudio.com/
![]()
![]()
![]()
![]()