What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Gren71]

Is it possibly charcoal ?

Kinda what im thinking but im not sure

Sponsored

 

[KQL]

Is it possibly charcoal ?

Was thinking the same thing. Most cabin filters are available in plain and charcoal configurations for claimed additional odor removal.

 

[SargeDiesel]

How did you get the media port cover off? That thing irritates the crap out of me.

Did you run the 115v switch to the same inverter for the one in the cab ? How/Where did you wire it in ?

 

[SargeDiesel]

Kinda what im thinking but im not sure

Was it hard to take out/replace ? Guessing its located under the glove box ? I have very low miles and could check what my oem filter looks like for comparison.

 

[HannibalSmith]

What started as taking the dash and misc. trim apart to get rid of some bad rattling ended up with installing the 115V switch/bed outlet and taking the media port cover off. Still have to find some time to install the aux switches.

How difficult was putting in the bed outlet?

 

[shockingtruth22]

It's a fairly straight forward and easy project. The most time-consuming parts were replacing the trim that held the 115V Power button to the left of the steering column and removing the cover in the bed (disregard if you don't have bedliner).

If you watch this YouTube video in full it will save you a ton of time -
(if you're on this forum many many thanks).

I chose not to disconnect/open up the door because I have some short column tools that could unscrew some of the bolts.

How difficult was putting in the bed outlet?

 

[SargeDiesel]

Is it glued on? I’m in search of a phone mount that will hold up on bumpy rides.

Check out the BULLETPOINT stuff.... its heavy duty stuff and will last a lifetime, plus there are a lot of options.

 

[SargeDiesel]

G man bun sunrider, in-chanel window visors, lockable hood latch and gas cap, red(sort of) door handles...
I don't like the shade of red, I will just do a red carbon fiber wrap on the handles...will post as soon as the ordered matching carbon-fiber- look of dashboard and shift panel trims come in.

Got any additional info on the hood locks ? I like them !!

 

[redman43]

Today was busy.

Installed Rokblokz mud flaps, Builtright Industries bed rails w/ DIY tie downs, red led footwell lighting from Oracle, black lug nuts, 12v power tap behind the dash for future use.

 

[NCSteve83]

Are the lights led "strips" ? Got a link ?

They are LED strips. They are actually just from home Depot, USB powered, (2) 24" strips. I have the wiring ran under the trim on the center console and for now I have to plug it on to USB port up front when I use them. I'm going to wire in a USB outlet under the dash so it's all hidden.

 

[SargeDiesel]

They are LED strips. They are actually just from home Depot, USB powered, (2) 24" strips. I have the wiring ran under the trim on the center console and for now I have to plug it on to USB port up front when I use them. I'm going to wire in a USB outlet under the dash so it's all hidden.

nice and simple, I like it.

 

[SargeDiesel]

I Installed the Bullet Point Rubi Grid and also installed a USB-C port so I didn’t have cables coming up from the console. Very happy with the result, and the quality of the Bullet Point hardware. Now I’m just waiting on a short cable for the phone.

where did you pick up the USB-C port ? Did it come with the bracket that's filling up the rest of the slot ? I have the same BulletPoint setup. A universal phone holder on each side and a GoPro mount in the center. I got the 10cm arm for the drivers side so it would be a little closer to me , ended up with the gray/black carbon fiber because I wasn't sure how it would match up... but looking at yours, it looks great !

 

[SargeDiesel]

Installed my fire extinguisher and wrapped up my cb.

How did the mount attach to the inside of the cab ? Thanks

 

[TomB]

Looks custom, as well as the red seats!

Yes, the seats were re-done with Katzkin
red with black piping. When I first seen it I thought
ewww, a bit too much red. But after looking at it again
and spending a few hours with it, driving, I thought
that it looked good.

 

[GotGladiator]

Got any additional info on the hood locks ? I like them !!

Yeah, they look nice. Nothing like the $200+ hood security lock tho. But I am OK with this one.

JeCar Hood Latches Locking Hood Catch Kit Aluminum Alloy Hood Locks for 2007-2018 Jeep Wrangler JK JKU, 2018-2021 JL JLU & 2020 Jeep Gladiator JT, Skull Style https://www.amazon.com/dp/B081RFB6WY/ref=cm_sw_r_apan_i_9G5VZR5F98JJDSQMDN10?_encoding=UTF8&psc=1

Sponsored