Gobi Diesel

[RS3]

I also found this rip in the driver's seat. It is out of warranty buy a few months but im going to see if they will do anything about it.

Sponsored

 

[Reddout99]

Nice find. That rip looks like someone tried repairing it already?
I'm a fan of Fuel wheels and have a different set than what you posted on mine.

 

[D_JT]

Gobi, Earl Gray and Hydro Blue were my top three color choices (not in that order). When I went to order my diesel at the end of '23 Gobi and Earl Gray were no longer available. Love the Gobi color. Not sure why they don't make it a standard color.

 

[NightHawk2025]

Nice find. That rip looks like someone tried repairing it already?
I'm a fan of Fuel wheels and have a different set than what you posted on mine.

Hello,

What size tire are you running and what lift size if any ? Thanks

 

[Reddout99]

Hello,

What size tire are you running and what lift size if any ? Thanks

Hey, how's it going?
I'm running 37 x 12.5 x 18" Falken Wildpeak AT3W tires. My lift is a 2" Mopar, but actual net lift height is closer to 3.5" on my JT Sport S.

 

[Stan H]

Hey, how's it going?
I'm running 37 x 12.5 x 18" Falken Wildpeak AT3W tires. My lift is a 2" Mopar, but actual net lift height is closer to 3.5" on my JT Sport S.

Actual real size of those Falkens?

 

[Reddout99]

I believe I programmed a 36.25" tire size with my JScan.

 

[nanook12]

Might as well start one of these so I can keep everything in one place. Not going to be a whole lot going on with it right now but little things.

This is my second 22 diesel Rubicon. First one I ordered then sold a year later and had regretted since. I started looking for another Silver Zynith JTRD but then changed to looking for Hobi which proved to be a little more difficult to find since it was a limited run. Fortunately I came across one and got it bought.


I've just been enjoying being back in one. I'd much rather drive this than my 18 GMC Duramax. Anyway I've been doing just a few small things to Gladiator. First few things have been a heavy Dee Zee bed mat along with a trail rail system. I liked the trail rail in my prior Jeep so decided this had to have it. Makes it nice for securing items when needed. Sunday I put the Tazer in. The stop/start had to go. Not a fan of it.

Today I tackled removing the discriminator out of the fuel fill neck. I tried the channel lock method with no luck. I ended up breaking the fuel cap seat area so I gave up and just pulled the whole assembly from out of the wheel well. I actually still had the discriminator out of my first diesel when i had it. I got all that put back together except I need to buy some new plastic push pins to secure the fender liner to the fender.

That plastic filler is a PITA! Mine jammed shut up in Northern BC. Middle of nowhere and couldn’t get fuel in! Finally smashed it open with a bottle of Heet. One of the first things you need to remove

 

[RS3]

That plastic filler is a PITA! Mine jammed shut up in Northern BC. Middle of nowhere and couldn’t get fuel in! Finally smashed it open with a bottle of Heet. One of the first things you need to remove

Already taken care of. I have a bulk fuel tank at home and my nozzle wouldn't work with the contraption. Had to fill one time using the funnel and that was the last time.

 

[RS3]

Finally got this added today.

 

[RS3]

Purchased a new winch yesterday. 30% off sale. . I am going to order the Grimm mounting plate for it.

 

[RS3]

Finally installed the winch today. Hopefully tint the windows soon. The next big items I am looking at are the 1.5" Clayton lift, wheels and some 35x11.50's. I do believe I will putting an EOC tune on it as well at some point. A little here and a little there. Plugging away at it.

 

[RS3]

I almost ran the power wire out the side of the control box but made it work out the back. Not touching the grille but very close. I also realized the it seems the front cover that comes with the winch seems to vary on which plate they send. Mine has the two extra holes on the outer edge on both sides. I've seen some that don't seem to have them.

 

['22JTRD]

Welcome Back
My seat has a rip in the same spot.
Guess mines lifted too much, my legs are too short or possibly I weight too much...
Came close to getting Gobi, the dealership had one when I got mine but couldn't break my life long habit of buying white trucks.
Same issue with the Apex Badland power supply wire.
It is tight against the grill but after having no problem with it the last 3 years, I left it out the back when I just got a new Arcus bumper shell Rhino Lined to replace the rusted mess the 1st one had turned in to.

 

[nbennettksu]

If you ever decide to remove/ swap out those fenders, please PM me.

Sponsored