"GrayBell" JTRD Build

[Iddpaul]

Been watching the end of year 2023 JT discounts and enjoying a Buddy's JTD for several years, so took the plunge (and the discounts) on a 23 JTRD. I've had several Jeeps over the years (JL, JK's, TJ's and an older CJ) and just finished a two year+ build on a JLUR (3.6, 3.5" EVO/Kings, Currie 1 tons, 4:88's, 37's) - now sold.

Decided I had to have a diesel while I could still get one new, but couldn't commit another 2+ years to a build due to family and work commitments. To get started I fast tracked the big stuff at my local shop so that I can get to towing a small teardrop trailer and overlanding. (More changes will come as time permits, but I'm now on the road).

Therefore I wanted to detail some of the changes in this build, and hopefully get some input for future improvements / add-ons!

So since we'll be heading West, the big items for me were strengthening the front, gearing and clearance, all while keeping the COG a little lower for towing.

BUILD:
Clayton Offroad Diesel 2.5"Overland Plus (Heavy Duty Triple Rate Springs) with Currie Currect-Lync Steering and Falcon SP2 3.3 2-3" JT Diesel Shocks
Stabilizer Relocation Bracket and Falcon damper
Clayton Swaybar and Rear Bump Stops
JKS ACOS Hydraulic Front Bump Stops
Dana 4:56 gears (Just on 2000 RPM at 75mph)
RCV Performance Ultimate CV Axles
Reid Racing Knuckles (future proof for flipped drag link options when I go to a taller lift)
Synergy Upper and Lower Ball Joints
Artec APEX front axle armor kit
Artec CAD Bracket and Front Truss
Adams front and rear drive shafts with 1350's
Synergy front and rear extended steel brake lines
Synergy sector shaft brace
ARB Diff covers (front and rear)
Tazer
Dirty Life Wheels and Nitto Ridge Grapplers 37x12.5X17
Bed Rack / Hot Metal Fab Rear Tire Carrier with KC Lights
Chromoly Rear Wide Track Axles
Warn Winch
Next Venture Front Bumper/guard
Pedal Commander

Here's where I started.

And where I am now.

The Build:

Completion of the initial build:

Sponsored

 

[NotSo Bright White]

That is a sweet ride! The diesel is AWESOME! Congrats!

 

[Iddpaul]

That is a sweet ride! The diesel is AWESOME! Congrats!

Thanks so much, you're correct, this little "tractor" is awesome and IMO well worth putting money into - super happy!

 

[Jefe1018]

Very nice. I started with a mopar lift but am starting to game plan my next phase to include many of the components you listed. It looks awesome!

 

[JBerd81]

That’s a nice JTRD!

 

[Iddpaul]

Very nice. I started with a mopar lift but am starting to game plan my next phase to include many of the components you listed. It looks awesome!

Thanks, appreciate your comments. I'm really happy with the Clayton Lift and the Falcons, the ride is excellent! I've done AEV, RK and EVO on past rides, and I'm extremely happy with quality, ride and support from Clayton. I was going with the Clayton 2.5" lift but the height I've got now is perfect for our overlanding trips! The forum and comments are great as I'm now reading every post for recommendations on a bed rack.

 

[NotSo Bright White]

Thanks so much, you're correct, this little "tractor" is awesome and IMO well worth putting money into - super happy!

If you figure out how to stop “putting money into” it, please let me know.

 

[Iddpaul]

If you figure out how to stop “putting money into” it, please let me know.

Haha, that would make my wife happy as well!

 

[RodRecket]

Tastefully done! Did you relocate the spare?

Also, what did you do with your stock knuckles? I've been looking at swapping to steel, maybe there's a deal to be had?

 

[Bocephus!]

Great looking Truck Looks very similar to mine!

 

[Iddpaul]

Tastefully done! Did you relocate the spare?

Also, what did you do with your stock knuckles? I've been looking at swapping to steel, maybe there's a deal to be had?

Thanks so much. The spare is an issue, the Nitto's / rims don't fit under the truck unless I remove the heat shield and then the track bar clearance is super close. Not the way I want to go so I'm looking at either a rack mount or even the AEV JT tire bed holder, still looking at options so in the interim the spare is in the bed! Worst case I may look at a different tire for mounting underneath.

Re my take-off parts, you would be welcome to any of them but unfortunately I've already given them to one of the young guy's at the shop since he's doing his own build.

 

[Reddout99]

Nice, nice work man. Great components & looks too!

 

[RodRecket]

Thanks so much. The spare is an issue, the Nitto's / rims don't fit under the truck unless I remove the heat shield and then the track bar clearance is super close. Not the way I want to go so I'm looking at either a rack mount or even the AEV JT tire bed holder, still looking at options so in the interim the spare is in the bed! Worst case I may look at a different tire for mounting underneath.

Re my take-off parts, you would be welcome to any of them but unfortunately I've already given them to one of the young guy's at the shop since he's doing his own build.

Shoot, it was worth a try. Thanks anyways.

I have my 38" spare in the bed of the truck utilizing an AEV tie down. It lays flat under my bed cover. There's plenty of room for daily items and when ever I need the bed for bulk (mulch, et cetera) I just take the spare out. The only time I really need all the bed space is around town for a house project. When I'm offroad and road tripping the essentials fit just fine with the spare. I have a small offroad teardrop so my need to haul camping supplies has changed quite a but over the years. It all depends on how you intend to utilize your truck. Luckily there is a pretty large aftermarket that caters to us.

 

[TheTrailGeek]

Awesome build!!

 

[TheTrailGeek]

so in the interim the spare is in the bed....

I'm in the same boat. Mine's been living in my bed for 2 years.

Sponsored