The White Rabbit
Well-Known Member
- First Name
- Chris
- Joined
- Jul 12, 2021
- Threads
- 18
- Messages
- 1,750
- Reaction score
- 3,092
- Location
- Sweeny Texas
- Vehicle(s)
- 2021 Jeep Gladiator Mojave
- Occupation
- Self Employed
Thanks for the explanation. Never too old to learn something new.Lower gear ratio (higher numerical numbers) mean your engine is running at a higher RPM taking off, thus has more torque to get things moving, so it gets moving faster.
A high stall converter means the torque converter doesn't grab or hold until the engine RPM is up to around 2400 in my case - I have to wind the engine up before it really grabs meaning I'm already revved up high.
Low ratios have higher numbers - like the Jeep 4.10 : 1 ratio where higher gear ratios have lower numbers like the Jeep 3.73 : 1 where the pinion or driveshaft turns 3.73 rotations for every 1 of the axle.
Higher ratios - lower numerically - give better MPG on the highway because the engine can run slower, lower ratios, like the 4.10, mean more lower end "grunt", taking off faster and such, but the engine runs faster on the highway.
My 73 was built as a race car by the prior owner so he put in a high stall torque converter, it's an automatic, so the engine builds up some speed, and gets into its power band before taking off. You punch it, the engine winds up and you GO. It's fun but not real practical in city driving. On the other hand, no one gets ahead of me at stop lights.
Sponsored