New from ORACLE: Auxiliary Light Pods for the Gladiator JT Flush Tail Lights

[ORACLElights]

If you're running ORACLE 5882-Series Flush Tail Lights on your JT, we just released something you'll want to know about! The new Auxiliary Light Pods install directly into the unused blind-spot sensor locations on your existing ORACLE flush tails with no external mounting, no drilling, and no cube lights bolted to the bumper. Each pod adds a second high-output LED per side, pushing light into the peripheral zones that standard reverse lights don't fully cover. If you've ever tried to back a trailer into a dark campsite or navigate around obstacles on the trail, you know exactly what we're talking about.

Two versions available:

• 5882-W-PD — White auxiliary lighting
• 5882-AW-PD — White + independently controlled amber backlight (great as a chase light on group trail rides)

A couple of things worth knowing before you order:

• Compatible with all ORACLE 5882-Series Gladiator Flush Tail Lights, not for factory tail lights
• Intended for JTs without factory blind-spot monitoring sensors
• These are not plug-and-play! Custom 12V hardwired install required. ORACLE recommends powering them through a dedicated fused circuit via factory aux switches, an aftermarket switch panel, or an ORACLE TRIGGER Controller (not directly to the factory reverse circuit due to CAN bus)
• Both driver and passenger side pods included
• Made in the USA, backed by a 1-Year Warranty

Link to product page: https://www.oraclelights.com/products/oracle-lighting-jeep-gladiator-jt-flush-tail-light-auxiliary-reverse-light-pods
Questions? Drop them below, we're happy to help!

Sponsored

 

[Bandit’s Lair]

Is this panel EXACTLY the same size as the factory Blind Spot Sensor?

 

[ORACLElights]

Is this panel EXACTLY the same size as the factory Blind Spot Sensor?

​

They're very similar in size and install in the same location as the factory Blind Spot Information System (BLIS) sensors.

These AUX Light Pods are designed specifically for Jeep Gladiator models without factory BLIS. If your Gladiator is equipped with factory blind-spot monitoring, these inserts are not compatible. Removing or disabling the factory BLIS sensors may result in warning messages, system faults, reduced vehicle functionality, or other unintended consequences.

 

[ChrisNLA]

I was thinking that may be redundant lighting for someone like me with the Oracle bumper lights already...

But then I saw they can come with amber too.

So this combined with that Euro light, then all of set up to flash.....

Ugh. Lemme get away from the computer

 

[Alpine Warthog]

I was thinking that may be redundant lighting for someone like me with the Oracle bumper lights already...

But then I saw they can come with amber too.

So this combined with that Euro light, then all of set up to flash.....

Ugh. Lemme get away from the computer

MEE TOOOOO

Sponsored