Rear USB on center console

[Mavrikk]

Sorry for the bump.

Do you have a guide on how you did this? I'd love to follow it and copy this. It looks clean. Thanks!

sorry I don’t! All I did was follow the 12v adapter instructions from Quadratec

12v adapter installation

it was fairly straight forward

Sponsored

 

[amoyer_01]

Follow this and also remove the center console between the seats to run the wire to the back of the console. It will much easier to not have the wire pinched by the shifter or emergency brake. I used the below items for my setup. I have 2 12v lighter ports and 2 dual USB ports, i have kids so future proofing.

https://www.amazon.com/gp/product/B08837F4JK/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B09F36Q8ZZ/ref=ppx_od_dt_b_asin_title_s02?ie=UTF8&psc=1

 

[Sigz]

sorry I don’t! All I did was follow the 12v adapter instructions from Quadratec

12v adapter installation

it was fairly straight forward

This shows working on the front dash/console. But you worked on the middle console right?

 

[amoyer_01]

This shows working on the front dash/console. But you worked on the middle console right?

That 12v adapter goes behind the 12v lighter port on the dash under the radio. You then run a power and ground wire to the back of the center console between the seats to power the USBs and 12v port.

 

[Sigz]

That 12v adapter goes behind the 12v lighter port on the dash under the radio. You then run a power and ground wire to the back of the center console between the seats to power the USBs and 12v port.

So the cable will be exposed running to the back of the center console?

 

[sharpsicle]

So the cable will be exposed running to the back of the center console?

It will be hidden under the center console.

 

[Sigz]

Sorry guys. I don’t mean to be so newbish.
I’m just not following what wires I should connect to other wires.

 

[Mr._Bill]

Sorry guys. I don’t mean to be so newbish.
I’m just not following what wires I should connect to other wires.

You use the cigarette lighter adapter to get power. You run two wires from the adapter, under the center console assembly, to the location where you are installing the new USB ports, and connect it all together.

Sponsored