charliez
Well-Known Member
- First Name
- Charlie
- Joined
- Oct 24, 2022
- Threads
- 11
- Messages
- 215
- Reaction score
- 374
- Location
- Carlos, Tx
- Vehicle(s)
- 2020 Jeep Gladiator Rubicon
- Occupation
- IT
- Thread starter
- #1
So my 3rd brake light was out. Did some looking and it was the pins on the printed led board broken loose. I had them fixed until reinstalling and they broke loose again and messed up the whole thing. So to the web we go. Found an $8 set of 8 led strips. When they came in, I simply removed the light, opened it up with a Dremel, stuck the strip over the now dead led's and passed the wires outside. Some hot glue closed it up and a quick connection to the wires, leaving the plug in place so it's still usable, and it's fixed. he bench test was simply using a 9 volt battery. The outside of this light was now n bad shape after 2 openings with a Dremel but it's still usable.
Sponsored