What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Factoid]

Finally installed my Synergy brace and track bar.

Sponsored

 

[PuRGE]

Added morale patches to the headliners today. Since I have factory headliners, I used 3M Command strips to attach which worked out great. My wife & I usually collect stickers/patches throughout our travels & place them everywhere (wife's Wrangler hardtop, kayaks, water bottles, laptops, coolers, etc). Will be a cool story board over the years. Thought it fitting to begin with a few of my military patches over the years. Still have a few to add, but here's the progress thus far.

Also, Plasti-Dipped the stubby antenna (Rydonair 13-inch). Didn't like how the bottom was carbon fiber.

 

[bastage]

Got my HotHeads Headliners installed & then went for a short drive & snapped a couple photos of my Jeep.. I think the first ones since I took the dealer plates off. .

 

[Dainbramaged]

Finally installed my Synergy brace and track bar.

Installation looks good, how long did it take you to install? Please share your thoughts on how well it fixed your loose steering after driving some miles with it. Thanks

 

[Jeeperjamie]

Got my LED turn signal bulbs in and set the DRL to turn signal. Glad I did because just having the Halogens on as DRL for a few minutes really made them hot. I feel like they would have done some damage running constantly. Maybe not. Pictures

Had to trim the tabs a little to get them to fit but they were free So I can't complain

 

[Factoid]

Installation looks good, how long did it take you to install? Please share your thoughts on how well it fixed your loose steering after driving some miles with it. Thanks

My steering wasn’t really loose, but it definitely feels tighter and more controllable than before. I made the additions as I am running big (13.5”) 37s and have a heavy foot, so some extra reinforcement seemed like a good idea.

 

[Dainbramaged]

My steering wasn’t really loose, but it definitely feels tighter and more controllable than before. I made the additions as I am running big (13.5”) 37s and have a heavy foot, so some extra reinforcement seemed like a good idea.

Makes sense.

 

[jwilson2899]

Installed my Midland MXT275 GMRS radio and antenna. Tested it out with an extra handheld I had, and it works great.

 

[Racer_X]

Winch, bull bar, and interrupt is in, wired to Aux 4 and fully tested.

 

[Factoid]

Winch, bull bar, and interrupt is in, wired to Aux 4 and fully tested.

Outstanding!

 

[Jeeperjamie]

Winch, bull bar, and interrupt is in, wired to Aux 4 and fully tested.

I've considered doing mine this way and keeping the stock bumper on. I did a bull bar on my JK and was pretty pleased with it. How hard is it to mount the winch like this, just curious.

 

[PuRGE]

Dipped the grill today.

 

[ThatStinging_Jeep]

Dipped the grill today.

Looks good man im planning on doing that or just wrapping it (nice color btw,cause i got a sting gray jtr as well :D)

 

[WVBKW]

Washed last evening and waxed (first time) this morning... geez lots of crevices on these rigs.

 

[Sazabi19]

Installed my hothead head liners, Sylvania Zevo super white LED (7443) for my DRLs (may be hard to see), and some rubbery grip tape on my door entries to try to protect the paint. It needs more, may buy a second set to fill in the gap and leak below the door area for any kicks. Have a foot rest I'll probably install tomorrow as well, have to keep working today.

Grip tape stuff: https://www.amazon.com/gp/product/B017J9SI4Y/ref=ppx_yo_dt_b_asin_image_o01_s01?ie=UTF8&psc=1

LED DRLs: https://www.amazon.com/gp/product/B01N4VNT2C/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1

JT Hothead Headliners:
https://hotheadheadliners.com/products/2020-jeep-gladiator-jt?variant=15491410427970

Sponsored