What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[SoCalGlad]

Finally got my Apex installed. Still just the one bolt to install in front. I ended up not needing the spacers so if anybody needs a set let me know.

Sponsored

 

[CWGrisw0ld]

Wrapped tailgate and installed Hauk letters.

Also installed Badgeglow Simple Aux

 

[Karnaj]

Wrapped tailgate and installed Hauk letters.

Also installed Badgeglow Simple Aux

Did a shop do the wrap or you bought online? How much did it cost? Looks sharp. I really like how a little black on that tailgate makes it pop.

 

[CWGrisw0ld]

Did a shop do the wrap or you bought online? How much did it cost? Looks sharp. I really like how a little black on that tailgate makes it pop.

Shop - I can barely be trusted to put my registration sticker on straight. $250 to wrap tailgate and apply vinyl overlays on top of the red Hauk letters.

 

[Karnaj]

Shop - I can barely be trusted to put my registration sticker on straight. $250 to wrap tailgate and apply vinyl overlays on top of the red Hauk letters.

Awesome. I think I've seen the vinyl for the tailgate as a self project at $195. I'd rather pay the extra to have it done too.

 

[CWGrisw0ld]

Awesome. I think I've seen the vinyl for the tailgate as a self project at $195. I'd rather pay the extra to have it done too.

Ridergraphix sells one for $90. I toyed with ordering it, but I was planning to have some Xpel put on some of the higher risk areas anyhow, so just had the same shop do the wrap.

 

[Strider62]

This is awesome.
Thanks, I'm totally gonna steal this. thanks for the links!

No problem - glad you found it useful! Have fun!

 

[Mojavicon]

I got the bed, hardtop, and grill rhino lined. Install the JCR molle rack, and mounted my hi-lift.

 

[Logan94605]

I got the bed, hardtop, and grill rhino lined. Install the JCR molle rack, and mounted my hi-lift.

Ooooh! I'm not a bed liner fan but the top is awesome. I've already got several scratches in my freedom panels. Great idea!

 

[Mojavicon]

Ooooh! I'm not a bed liner fan but the top is awesome. I've already got several scratches in my freedom panels. Great idea!

Yeah, I'm really happy with it. I have already had a few scratches, narrow trails and overhanging trees and bushes kill it every time. This will be a lot more durable and I won't be so concerned about it getting scratched/dinged when I take it off and story it in the garage.

 

[Gren71]

I got the bed, hardtop, and grill rhino lined. Install the JCR molle rack, and mounted my hi-lift.

how much did the lining on the top set you back?

 

[PLEG1972]

"25 Amp constant hot 12v plug to back seat area" do you have a write up on this? Or is there already one in the forum somewhere? I'm still a noob I'm trying to find all sorts of things and having less than good luck

I don't have a write up but its simple as hell. I just cut the jumper cable clamps off (the attached photo) and attached some wire lugs to the end. The hardest part was getting the wires under that plastic chanel under the hood. If you really want to, it will reach the back of the center consul if you run it down the middle instead of along the door. This post is as dyslexic as I am...pictures are in reverse order. BTW, I also have an 80A circuit running to my bed for my Renogy 50a DC to DC charger. Its that massive red conduit in one of the photos.

 

[mountainpass]

What are the two holes in the bed floor for? They are only on driver side and they have a black plastic cover in them.

 

[Dewyaw]

I don't have a write up but its simple as hell. I just cut the jumper cable clamps off (the attached photo) and attached some wire lugs to the end. The hardest part was getting the wires under that plastic chanel under the hood. If you really want to, it will reach the back of the center consul if you run it down the middle instead of along the door. This post is as dyslexic as I am...pictures are in reverse order. BTW, I also have an 80A circuit running to my bed for my Renogy 50a DC to DC charger. Its that massive red conduit in one of the photos.

Mmmmmmm.........tuna.........

 

[JET222]

What are the two holes in the bed floor for? They are only on driver side and they have a black plastic cover in them.

The line-x guy said they were used by machines to hold onto the pieces when assembling the bed. He just sprayed over them. Not sure if this is correct, but sounded good to me.

Sponsored