Sponsored

Teraflex 1.5 Inch Front Leveling Kit

Reeb65

Well-Known Member
First Name
Jason
Joined
Nov 30, 2018
Threads
1
Messages
112
Reaction score
189
Location
Pensacola
Vehicle(s)
2020 Gladiator Rubicon
Here is a Teraflex using only the 1 inch spacer on the front. Nitto Grappler 35x12.50x17 tires on the Mopar off road wheels.
jeep1.jpg

jeep2.jpg
I have pretty much the same setup as you and getting ready to add a winch. Did you have much sag after the winch was installed? From pics it still looks level.
Sponsored

 

Sorbs

Well-Known Member
First Name
Brian & Sunny
Joined
Aug 3, 2018
Threads
18
Messages
858
Reaction score
1,590
Location
Colorado Springs
Vehicle(s)
2021 Ram TRX, 2020 Gladiator LE
Vehicle Showcase
1
1A556766-D85E-4ED1-94FA-20307457738E.jpeg
2BB5F993-A7F8-40A4-8CAA-720DE847123C.jpeg

Mopar 2”, Terra-Flex 1.5” on 37’s, and 12k winch.
 

bhbdvm

Well-Known Member
First Name
Brian
Joined
Jul 8, 2019
Threads
8
Messages
177
Reaction score
260
Location
western NC
Vehicle(s)
2020 Sting Gray Rubicon, 2016 BMW R1200GS
I have pretty much the same setup as you and getting ready to add a winch. Did you have much sag after the winch was installed? From pics it still looks level.
Very little rake in my case. I wanted some because I will be putting a canopy and roof top tent on the bed in the near future . Each vehicle is a little different.
 

Reeb65

Well-Known Member
First Name
Jason
Joined
Nov 30, 2018
Threads
1
Messages
112
Reaction score
189
Location
Pensacola
Vehicle(s)
2020 Gladiator Rubicon
Very little rake in my case. I wanted some because I will be putting a canopy and roof top tent on the bed in the near future . Each vehicle is a little different.
Thanks for the feedback
 

Snowdogyyz

Well-Known Member
First Name
Steve
Joined
Dec 7, 2019
Threads
25
Messages
112
Reaction score
75
Location
NC
Vehicle(s)
Gladiator Overland
I bought the Terraflex for my Overland. Trying to decide- 1” or 1.5”. I don’t want a rear squat look. Putting 285’s on and no additional lift. What do you guys think?
 

Sponsored

Reasons

Well-Known Member
Joined
Apr 5, 2019
Threads
18
Messages
295
Reaction score
165
Location
NC
Vehicle(s)
KL Cherokee Trailhawk, JT Gladiator RUBICON
Occupation
Enabler
When I added a steel bumper and winch my front end dropped an additional 0.5", which gave me a total of 2" of rake. I installed the 1.5" Teraflex up front and Daystar 0.75" rear spacers to get my rake back to 1.25."

I'm still debating on tires. Most likely I will only go 35s but 37s are so tempting. Will 37s rub at FULL Articulation (Sway bar disconnected) with just a 1.5" lift and 1" bump-stop up front?
 

Reeb65

Well-Known Member
First Name
Jason
Joined
Nov 30, 2018
Threads
1
Messages
112
Reaction score
189
Location
Pensacola
Vehicle(s)
2020 Gladiator Rubicon
I bought the Terraflex for my Overland. Trying to decide- 1” or 1.5”. I don’t want a rear squat look. Putting 285’s on and no additional lift. What do you guys think?
Based on what i have observed the Overl
I bought the Terraflex for my Overland. Trying to decide- 1” or 1.5”. I don’t want a rear squat look. Putting 285’s on and no additional lift. What do you guys think?
Based on the visual difference between the rubicon and overland i think you will need the full 1.5" to get level.
 

Deleted member 24880

I just did the full 1.5” on my sport s. My rear is a tad saggy but I also have 250-300 of weight in the bed for winter. I say do all 1.5”. You can always add a rear spacer if you need to. They are cheap.
 

12BNNT

Well-Known Member
Joined
Jan 29, 2019
Threads
0
Messages
479
Reaction score
566
Location
Missouri
Vehicle(s)
2020 JTR
Based on what I’ve read on the forum, I went ahead and ordered the terraflex 1&1/2” spacer lift for my JTR. I kept the Bestop High Rock bumper and 15k winch from the JK to put on here and being as it dropped the front of my JK sport almost an inch I figured I’d need the full 1&1/2”’s. Got the winch and bumper mounted today (along with the led halo headlights and fog lights) and measuring before and after, the JTR only dropped 1/2” in the front. So now the plan is to put the full 1&1/2” in the front and a Daystar 3/4” in the rear. Effectively lifting the back by 3/4” and 1” in the front. (A little more room for the 35’s when off road) yet keeping some rake for towing purposes. Got a 7x16’ cargo camper conversion to pull. With 300lbs tongue weight the back dropped 1&1/2”’s.
 

Sponsored

NEWBWHEELER

Well-Known Member
Joined
May 13, 2020
Threads
8
Messages
355
Reaction score
564
Location
BC
Website
www.instagram.com
Vehicle(s)
2020 Ford Explorer ST, 2020 Hydro blue Gladiator
Build Thread
Link
Occupation
Free loader
Jeep Gladiator Teraflex 1.5 Inch Front Leveling Kit 2BB5F993-A7F8-40A4-8CAA-720DE847123C
Jeep Gladiator Teraflex 1.5 Inch Front Leveling Kit 2BB5F993-A7F8-40A4-8CAA-720DE847123C

Mopar 2”, Terra-Flex 1.5” on 37’s, and 12k winch.
Would you say that the front is a tad higher than the rear? It’s hard to be sure from those angles. I ask because I have the same lift and am about to put on a 10000lbs 10s and I’m debating if I should do the 1” or full 1.5”.
 

Sorbs

Well-Known Member
First Name
Brian & Sunny
Joined
Aug 3, 2018
Threads
18
Messages
858
Reaction score
1,590
Location
Colorado Springs
Vehicle(s)
2021 Ram TRX, 2020 Gladiator LE
Vehicle Showcase
1
Would you say that the front is a tad higher than the rear? It’s hard to be sure from those angles. I ask because I have the same lift and am about to put on a 10000lbs 10s and I’m debating if I should do the 1” or full 1.5”.
I’ve a 12k Apex winch in the bumper. It’s level.
 

Browning

Well-Known Member
First Name
Todd
Joined
Jun 23, 2020
Threads
7
Messages
112
Reaction score
242
Location
Georgia
Vehicle(s)
2020 JT Rubicon
Occupation
State Farm Agent
Jeep Gladiator Teraflex 1.5 Inch Front Leveling Kit 1inchspacerfront

I installed the 1" spacer only on mine this weekend. Measured to the rock rail from the ground and it's 18 1/2" in the front and 19" in the back after install. I have the factory steel bumper with mopar 7" lights, Light bar, and 9500lb winch. Sitting on 35x12.50 ridge grapplers. For reference for anybody who is thinking of doing this. I also have airbags installed in the rear but no air in them (actually 5lbs) in this pic and for the measurements. Truck sitting on a hill in this pic in front of my office so it's hard tell the rake but it's there.
 

Rubiman

Well-Known Member
Joined
Feb 10, 2021
Threads
26
Messages
212
Reaction score
53
Location
The moon
Vehicle(s)
Gladiator Rubicon
Here is a Teraflex using only the 1 inch spacer on the front. Nitto Grappler 35x12.50x17 tires on the Mopar off road wheels.
Jeep Gladiator Teraflex 1.5 Inch Front Leveling Kit 1inchspacerfront

Jeep Gladiator Teraflex 1.5 Inch Front Leveling Kit 1inchspacerfront
How does it ride? Interesting it’s still leveled in the front with a winch.
 

Rubiman

Well-Known Member
Joined
Feb 10, 2021
Threads
26
Messages
212
Reaction score
53
Location
The moon
Vehicle(s)
Gladiator Rubicon
Jeep Gladiator Teraflex 1.5 Inch Front Leveling Kit 1inchspacerfront

I installed the 1" spacer only on mine this weekend. Measured to the rock rail from the ground and it's 18 1/2" in the front and 19" in the back after install. I have the factory steel bumper with mopar 7" lights, Light bar, and 9500lb winch. Sitting on 35x12.50 ridge grapplers. For reference for anybody who is thinking of doing this. I also have airbags installed in the rear but no air in them (actually 5lbs) in this pic and for the measurements. Truck sitting on a hill in this pic in front of my office so it's hard tell the rake but it's there.
Looks perfect. What made you only go with the 1”?
Sponsored

 
 



Top