What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[19Comanche86]

Installed the bed power outlet and switch. The bed outlet install was fake, harness for it is a pain because you have limited access. The button that goes under the headlight switch was a nightmare. Had 3/4 of the dash apart to change it. Wish I had known it had to be ripped that far down I would have upgraded the speakers while Everything was out.

Sponsored

 

[Gatorized]

Installed the bed power outlet and switch. The bed outlet install was fake, harness for it is a pain because you have limited access. The button that goes under the headlight switch was a nightmare. Had 3/4 of the dash apart to change it. Wish I had known it had to be ripped that far down I would have upgraded the speakers while Everything was out.

Is there a switch available for the space on the right?

 

[19Comanche86]

Is there a switch available for the space on the right?

Not that I know of. All I know is, what a pain in the ass install it was. Was gonna do a how to thread but I didn’t get started till 930pm and didn’t get done till 11 so I didn’t take the time to take pics.

 

[IamAlan]

Took the doors off for the first time, mounted holders in the garage and installed new rugged ridge tube doors/covers... just in time for a Colorado mountain rainstorm. Couldn’t drive with the tube doors, tomorrow I guess!

I have those doors. I had trouble with the passenger side door rattling because the rubber bumper wasn't long enough and I could not adjust the rattle out of it.
I went to ACE hardware and spent $1.99 on a threaded rubber insert and a 3/4" long, 1/4x20 screw. Replaced the bumper and voila!

 

[arsy51]

Just picked up Artemis two days ago. First (most common?) mod was swapping in the Rydonair 7" antenna:

 

[Willys2Gladiator]

Swapped the front bumper for a Rugged Ridge HD Stubby, and added a Smittybilt XRC Gen 3 9.5k winch!

How much front end drop did you see with this added?

 

[TxSmitty]

Well it took 2 days, not one. Not bad for one guy by himself. Installed my new Clayton 3.5 lift.

 

[Rubi_Rhod]

Not much, but moved it out of the carport to make room for some painting. Tins for the buggy.

 

[Tango270]

How much front end drop did you see with this added?

Only about half an inch. Not much at all.

 

[Jimmij]

Added my badge glow for the aux switches. Just to make it cleaner when accessories are installed

 

[Bacstar]

Ha! Your beagle looks like Falkor. Love it!

If you don't mind, I need to send this to my friends and family This is awesome...

 

[Clayton Off Road]

Well it took 2 days, not one. Not bad for one guy by himself. Installed my new Clayton 3.5 lift.

Looks great!!

 

[ShadowsPapa]

Very interested the hitch. Will you ship to Ohio?

I cut down the HUGE box the other receiver came in (it was like 18" longer than needed, wow, and NO PACKING material in the box - none at all)
The Draw-Tite is boxed up nice and snug with the bolts and washers it came with (forgot to put the instructions in the box, rats - will find it in PDF format).

 

[IamAlan]

I don't now who came up with this idea of vent mounted mirrors, but y'all are BRILLIANT!
Not only do they keep you legal when you're running naked, they are actually quite effective. And I do recommend these, they're well made, low profile, and use a superior adhesive. https://www.amazon.com/gp/product/B00VCPEEX6/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

 

[IamAlan]

I cut down the HUGE box the other receiver came in (it was like 18" longer than needed, wow, and NO PACKING material in the box - none at all)
The Draw-Tite is boxed up nice and snug with the bolts and washers it came with (forgot to put the instructions in the box, rats - will find it in PDF format).

Private Message Incoming

Sponsored