What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Trauma PA]

It wasn't an advertisement. I have nothing to do with the revkit guys at all. All of this is irrelevant in the grand scheme of things, but its also a nice distraction from the BS going on in the world. I never thought that anything should or should not get recognition, of any sort, This really isn't worth a full thread. Truth be told when I get negative feedback on anything I do, I ask for clarification so that possibly if relevant I can make a positive change. It is a pretty cool site for my needs, of keeping track of whats out there, and fits in with the what did you do to your gladiator today. What's the difference.

I must be naive or missing something. Cool website and nice Mojave build. I’ll visit the site again when shit on here gets boring. I also humor myself by visiting the Bronco6g forum occasionally. Exciting for those Ford folks. I remember waiting for the Gladiator back in 2018 and 2019. The build to the launch. And then finally getting my first Glad in July 2019.

Sponsored

 

[mazeppa]

48" retractable key holder placed to the rear inside my Diamondback cover to have a key handy to unlock the rear cover when the tailgate is unlocked and opened. This is one less key to carry and I remove the key when the cover is removed. I have another same-cut key for the front cover that I seldom open inside the JT.

https://smile.amazon.com/gp/product/B0039YY2QM/ref=ox_sc_act_image_1?smid=A2ZFFUTMAPN8ZW&psc=1

 

[TexasCajun]

Here is the link to mount arm
https://www.amazon.com/dp/B005KWPJ04?psc=1&ref=ppx_yo2_dt_b_product_details
and here is link to the actual phone holder!!
https://www.amazon.com/dp/B0055PH0XA?psc=1&ref=ppx_yo2_dt_b_product_details
Let me know if the links dont direct you!! Good Luck

Thank you. What is the piece called on the hand grip that adds the ball?

 

[adentmon]

Fancied up the 2x8 I had in the bed today. Didn't get into sanding it and all that though I kinda wish I would have, but at least it looks like it belongs now ?

 

[eafrica1974]

Thank you. What is the piece called on the hand grip that adds the ball?

I believe this is what you are asking, see link below
https://cmmoffroad.com/products/jt-grab-bar-ball-mount

 

[DrJ]

Only thing connected to it at the moment is a solenoid to isolate power to the winch. Will probably do the same with the Anderson plug to the rear of the vehicle.

What winch solenoid did you use? Got a link?

Thanks,
J

 

[TexasCajun]

I believe this is what you are asking, see link below
https://cmmoffroad.com/products/jt-grab-bar-ball-mount

Yes. I would like the one that goes on the hand grip, but now that I know what to look for it I am sure I can find it. I appreciate it!!

 

[Chance575]

What winch solenoid did you use? Got a link?

Thanks,
J

old Ford starter solenoid, go into any parts store and just ask for it

 

[Weasel Caesar]

Changed the tire. Blew a sidewall wheeling through an arroyo yesterday. Man, was it hot! But we beat the rain and got out of there without further issues.

 

[JDawg11]

New ass

 

[jorbasaurus]

New ass

I’m pretty simple, I see UGA or Sarge Green and I press like, great looking truck!… in other news buttoned her up bc boring adult things (unrelated pic I snapped of the diesel shop behind my house today ?).

 

[j.o.y.ride]

Had the skids welded on, and the longer brake lines finally installed.

 

[Kevin2323]

New ass

What kind of lift and tires you rocking there big dawg?

 

[ColoradoGlad]

I finally got around to adding the right side rear recovery hook.
For others adding a second hook, a few call outs.

I bought the right-side factory Part No.: 68355490AA
BEZEL-REAR BUMPER.
This Bezel has the cut out for the hook.

Come to find out, the Bezel doesn’t fit the non Rubicon bumper, the design is just a little off.
I ended up cutting out the current Bezel to match the one I bought.
I added edge trim to give it a finished look.

Also painted the left hook to match.
Picked up some paint that was pretty much a perfect match to the Red Hook.

 

[Gren71]

I finally got around to adding the right side rear recovery hook.
For others adding a second hook, a few call outs.

I bought the right-side factory Part No.: 68355490AA
BEZEL-REAR BUMPER.
This Bezel has the cut out for the hook.

Come to find out, the Bezel doesn’t fit the non Rubicon bumper, the design is just a little off.
I ended up cutting out the current Bezel to match the one I bought.
I added edge trim to give it a finished look.

Also painted the left hook to match.
Picked up some paint that was pretty much a perfect match to the Red Hook.

outstanding job! Just ordered a new tow hook and the two bolts. Definitely copying this.

Sponsored