What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[UnforseenWeather]

Added a Weathertech roll up tonneau cover. Didn’t fly off or flap around like Superman’s cape on the drive to work, so yay there!

Would have had it on sooner but one of the rails arrived with a ding in it. Couple emails later and Weathertech’s excellent CS sent a new one out so I was able to get it installed yesterday in the 60* awesomeness.

Sponsored

 

[Rlindlau]

Added Rough Country 2.5" Leveling kit plus 1/2" Terraflex spacers up front and Daystar 3/4" Rear spacers in prep for adding 35's

 

[Gren71]

I'm thinking about getting some tube doors. I've got two kids, and live somewhere with busy streets and awful drivers, so any little extra protection is welcomed. Plus I think they look awesome. Does anyone have a recommendation on a good set? The Mopar ones look fine, but are kind of pricey.

I have the EAG doors with the star in them. They are great with the kids and look good as far as i am concerned.

No issues all season with them.

https://www.amazon.com/EAG-2018-201...8&sprefix=gladiator+tube+door,aps,223&sr=8-11

In the picture you can see my youngest happily strapped in his car seat.

 

[doc-ketamine]

Upgraded to 35x12.5 Tokyo Open Country AT III tires on Method 703 wheels in black. Had to wait over 4 months for delivery - I probably could have gotten them sooner if I canceled then re-ordered but the newer prices were way higher. I’m lookin forward to seeing how these puppies do in the snow as they are triple-flake rated.

Seeing them mounted and inflated to 35psi? Made me wish I had gotten 37s as these only netted me an inch of height gain.

 

[jsalbre]

Upgraded to 35x12.5 Tokyo Open Country AT III tires on Method 703 wheels in black. Had to wait over 4 months for delivery - I probably could have gotten them sooner if I canceled then re-ordered but the newer prices were way higher. I’m lookin forward to seeing how these puppies do in the snow as they are triple-flake rated.

Seeing them mounted and inflated to 35psi? Made me wish I had gotten 37s as these only netted me an inch of height gain.

Looks good. Going from 33s to 35s is only ever going to net you an inch of height assuming the tire dimensions are accurate. Only one inch of tire goes under the axle, the other inch goes up!

 

[MDPensFan]

Permanent plates came in today so I put on my sho and sto license plate bracket.

 

[Dewyaw]

Installed CMM Off Road mirrors.

Man I love those leather dash panels…waiting not-so-patiently for them to come out with Mojave orange stitching…

 

[Dewyaw]

About to install some MC Duroflex arms.

Seriously considering this…can you talk about the experience and result of putting these in?

 

[Wheelin98TJ]

Man I love those leather dash panels…waiting not-so-patiently for them to come out with Mojave orange stitching…

I think the stitching I have is orange. It's just not very bright.

But I'm not very good at seeing colors, maybe it's tan.

 

[Dewyaw]

I think the stitching I have is orange. It's just not very bright.

But I'm not very good at seeing colors, maybe it's tan.

I know the do have tan stitching, pretty sure that’s what you have. They have red, white, and tan. No orange yet…

 

[Dewyaw]

I might need to make the change to these. I have RokBlokz flaps installed, but my rear flares still look like they've been shotgunned from all the gravel and rocks, and I'm starting to get quite a few chips in the paint.

My only concern is that I have a MORE Hide-A-Step for my wife to get in easier (bad back) and I'm not sure it'll stick out far enough for her to use with those rails. Would you mind taking a measurement from the body side (flat part under the door) out to the edge of the rail?

I did the exact same thing on the exact same truck (same color and all lol) hoping to get a useable step for the wife and kids…turns out the step is still so high, they just bypass it. It’s now just a really expensive mud guard…

 

[JTBurns]

Reached the hallway point ony loan! And cleaned it up after some fun on the trail yesterday.

 

[Sonoran_Mohavey]

Not today...but over the weekend I installed the Mopar steel stubby bumper. Very happy with it. Hardest part was swapping the Mojave tow hooks into it. Not hard, just took extra time because of it. I decided to go with the Rubicon skid plate since it fits perfect. I don't care for the silver Mojave one and I didn't want to mess with trying to jerry rig it to fit. The reservoirs for the fox shocks are still protected great too which was my biggest concern.

 

[jeepdan]

Installed an ARB Deluxe Classic Bumper today, after striking a deer back in October.
Still have to order a new front turn signal light (broken one is still taped in place). LOL
Weight of bumper only dropped the front down a 3/8" measuring from the center of the front wheel opening.
I expected more.
Having a Teraflex 1 1/2" leveling kit ready to go, I only used the 1" pucks.
Very pleased with the trucks stance is now.

 

[jeepdan]

I will take a better photo outside and post in the bumper thread.

Sponsored