ilovebikes99
Well-Known Member
Throw em in the trashYep,I was really disappointed it didn't fix the issue. Trying to decide what to do next
Sponsored
Throw em in the trashYep,I was really disappointed it didn't fix the issue. Trying to decide what to do next
At this this point, looks like a good possibilityThrow em in the trash
Hey Kenny,Have to give an update to fix. The supplied new (2x)10w resistors don't seem to have solved the issue with the reverse lights working correctly. I installed both new resistors yesterday and all worked fine. Parked Gladiator in garage overnight, started truck,revese lights are still doing the on/off thing. adding the 2 new resistors doesn't seem to have fixed the issue.
Yes sir, I did use the connectors correctly(use them for model railroad)the really funny part is after I used my Gladiator and decided to put into the garage the reverse lights worked. I tried several times to re create the non working situation it wouldn't meaning they worked as should. It's weird cause one time they'll work and next time they won't. But, I will go double check nowHey Kenny,
Strange. You're the first out of several stating this.
Are you using the scotch locks that shipped with the resistors? Sometimes, it takes a little extra pressure when clipping those on to make sure they're making good enough contact with the wires.
Can you double check this and let me know?
Went to double check with the boss(wife)and each and every time they worked as they're supposed to. I shut the engine off, re started and still everything(reverse lights)work. I'll just keep an eye outHey Kenny,
Strange. You're the first out of several stating this.
Are you using the scotch locks that shipped with the resistors? Sometimes, it takes a little extra pressure when clipping those on to make sure they're making good enough contact with the wires.
Can you double check this and let me know?
Went out this morning and reverse lights are doing the on/off/flicker again so after installing the 2 new resistors, double checking, etc. the issue isn't fixedHey Kenny,
Strange. You're the first out of several stating this.
Are you using the scotch locks that shipped with the resistors? Sometimes, it takes a little extra pressure when clipping those on to make sure they're making good enough contact with the wires.
Can you double check this and let me know?
[QUOTE="SpecialK,Haven't got my set yet but..
I have factory halogens and a JSCAN.
Do I omit the resistor and change some JSCAN settings to get everything to work?
Can't find in the thread the settings for halogen OEM.
Went out this morning to once again double check the reverse light issue. Guess in this one I was the "DumbA$$) I brief I may have placed the new resistor in the wrong wiring. Double checked the picture supplied by Oracle. All good nowWent out this morning and reverse lights are doing the on/off/flicker again so after installing the 2 new resistors, double checking, etc. the issue isn't fixed
These are the JScan items I set to 'active' and works fine with no resistor, no warnings, and the reverse lights stay lit.
Do you only have the bumper reverse lights? Or do you also have the Flush Mount Tails installed?I got a 21' Rubi with LED package and their reverse bumper lights giving me signal out error. I know about the google doc. I am still very disappointed waiting all this time for easily avoidable day 1 error.
now we keep waiting?!
Do you only have the bumper reverse lights? Or do you also have the Flush Mount Tails installed?
I ordered both at the same time plus a set of pre-runners that all came on the same order delivered and installed same day.Do you only have the bumper reverse lights? Or do you also have the Flush Mount Tails installed?