What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Rockabillyroy]

Bolt hood lock. No grill trim. Flip key fits just fine.

Sponsored

 

[OnlyOne]

Finished the Fender Chop.

 

[injaneer]

Removed my sound bar for adding 6x9, but found I only had a 6x8. So had to order new speaker.

https://www.jeepgladiatorforum.com/forum/threads/blue-on-black-build-chronicles.50765/post-846349

 

[NoDoorsNoProblem]

Got a couple things in the mail. Rugged ridge door sill liners and stubby antenna from Quadratec. And Ford Performance ARB compressor.

“Ford performance??? What’s this guys problem??” you may be thinking. Well, apparently Ford’s aftermarket sells the portable ARB single system branded under their Ford Performance. Same thing, same ABR product, just different colors and a Ford Performance sticker on it.

After much deliberation on single vs dual, in-cab versus behind seat versus portable, I decided that for my minimal uses the single portable is probably the best bet. I saw it available on Stage 3 Motorsports, a great company that supports the Ford aftermarket which I’ve bought from when I had my F150. Except the Ford version retails for about $50 cheaper than the straight up ARB version.

1 sticker removal later and now I have a portable ARB single!

 

[AverageDad]

I installed my new @Tuwa Pro Moab rack that I won on Thanksgiving day, and added some graphics from @pixeldecals. Unfortunately, the vent graphic is only on the right because I screwed up the left one.

 

[pixeldecals]

I installed my new @Tuwa Pro Moab rack that I won on Thanksgiving day, and added some graphics from @pixeldecals. Unfortunately, the vent graphic is only on the right because I screwed up the left one.

Looking good! I still have some of this special material and can make you a new driver's side one to try again. Message me and I'll hook you up.

 

[Gren71]

Finished the Fender Chop.

Im pretty sure ive asked before but please bare with me. My brain is comparable to a Cadbury egg.

what rims are those?

 

[mdhaman]

New wheels and tires again. 20 x 10 Moto Metal on 285-65-20 (35inch)Nittos. Switched out steps to Go Rhino.

 

[XraytecH]

Yanked the factory cig lighter port and installed a bass knob. Cleaner install than just double stick taping it to the dash.

 

[eyekode]

Just a wash and wax. I am really enjoying this truck!

 

[awraynor]

New wheels and tires again. 20 x 10 Moto Metal on 285-65-20 (35inch)Nittos. Switched out steps to Go Rhino.

The black topper just completes the look.

 

[OnlyOne]

Im pretty sure ive asked before but please bare with me. My brain is comparable to a Cadbury egg.

what rims are those?

Those are the Quadratec 1941 wheels.

 

[ospreyfe55]

Saved about $300 bucks on a Trail Rail for the bed! Went to the local box store and bought a 10’ stick of Unistrut. Side rails are 51” long and only had to drill one hole on each rail to mount it up! Next project will be a bed rack that I’m currently drawing the plans for!

 

[tweak89]

I fixed both my sun visors today. Typical failure point, plastic breaks at retention point. Took about 15 minutes per side. 5/16 push nut, Dremel tool, long socket and a hammer!! Now they both feel solid. What a terrible design decision by Chrysler.

 

[JTzntz]

I fixed both my sun visors today. Typical failure point, plastic breaks at retention point. Took about 15 minutes per side. 5/16 push nut, Dremel tool, long socket and a hammer!! Now they both feel solid. What a terrible design decision by Chrysler.

Both of mine broke at separate times. Luckily still under warranty so the dealer took care of them. 2k miles away from end of warranty so I have a feeling I’ll be doing the push nut repair in the future.

Sponsored