What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[jonsheritahe04]

Winch Day Yesterday - Warn VR 10k, Warn Winch Plate, Winch Guard., Fishbone Hook. Took about 4 hours but fairly straight forward install.

Sponsored

 

[SubiRubi]

Oil catch cans perform this function as well, right? Is there a pro/con for either, or just not want to have to empty a catch can?

I got this one.. A little expensive yes but works great and easy to drain.. Has a hose that hangs down behind the fender with a valve..
AmazonSmile: Mishimoto MMBCC-JLP-18PBE Baffled Oil Catch Can Compatible With Jeep Wrangler JL 3.6 L 2018+ Black : Automotive

This is about 6 months worth of oil I drained the other day.. '

 

[Gren71]

I got this one.. A little expensive yes but works great and easy to drain.. Has a hose that hangs down behind the fender with a valve..
AmazonSmile: Mishimoto MMBCC-JLP-18PBE Baffled Oil Catch Can Compatible With Jeep Wrangler JL 3.6 L 2018+ Black : Automotive

This is about 6 months worth of oil I drained the other day.. '

Ive had this on my mind for a while. Just haven’t found the need to pull the trigger. How often so you empty it? Like how many miles?

 

[mx5red]

I finally finished my under driver’s seat subwoofer project. It was ugly, but it works!

https://www.jeepgladiatorforum.com/...-and-audio-upgrade-journey.55339/#post-906196

 

[Rusty PW]

Picking mine up at 3 today.

 

[aprez27]

Mounted my tent! OVS Nomadic 3.

 

[NCSteve83]

Installed by Rubigrid phone mount by Bulletpoint Mounting Solutions. Would I normally spend $100 on a phone mount.... absolutely not? But I got a free $100 Amazon gift card so why not.

 

[Gren71]

Picking mine up at 3 today.

it is 2:58...i expect pictures !

 

[869 KPH]

it is 2:58...i expect pictures !

Ha if @Rusty PW is anything like me, he'll be too busy playing with it for at least the first week before he opens the forum again.

 

[Rusty PW]

it is 2:58...i expect pictures !

Tomorrow. Wifey ran me ragged today.

 

[Chuck]

Dropped it off for tint install tomorrow. Cancelled the bed liner - they didn’t bother telling me it would’ve been $100 off if I had it done by today. They even had openings....... I’m even a returning customer
Received an email my lift will arrive Thursday!! Woohoo!

 

[Markpod7]

Installed my Mopar steel bumper and skid plate today. Waiting for my Maximus 3 xlp hoop still. The Mopar one will do for now.

next up, steel rear bumper and that’s it for a while

Link for those blacked out markers?

 

[95Bravo]

Went to the dealer for issues with my Blind Spot alert not working with my doors. They said some of the male leads were bent. It wasn’t covered under warranty because I took off the doors and plugged the doors back in which caused the bent pins. Then they wanted $300 to bend them back. It took me 15 minutes to detach the plug from the body and straighten the pins. The arrow shows the clip that you need to push out then slide the plug down to detach from the frame. I’m going to leave it detached for easier plugging in when I put the doors back on. It’s a shame this piece isn’t better made considering people by jeeps to take the doors off among other things.

 

[FloridaJT6MT]

Went to the dealer for issues with my Blind Spot alert not working with my doors. They said some of the male leads were bent. It wasn’t covered under warranty because I took off the doors and plugged the doors back in which caused the bent pins. Then they wanted $300 to bend them back. It took me 15 minutes to detach the plug from the body and straighten the pins. The arrow shows the clip that you need to push out then slide the plug down to detach from the frame. I’m going to leave it detached for easier plugging in when I put the doors back on. It’s a shame this piece isn’t better made considering people by jeeps to take the doors off among other things.

Yeah it sucks. There’s a whole thread about this issue.

 

[WilliamD]

3” JKS lift with fox 2.0’s, some steer smart bits, 37”Mickey Thompson Baja Boss AT, and method 703 wheels

Sponsored