What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Hurricane]

Installed a pair of Baja Designs lights on the rear bumper. Will get them wired up later this weekend.

Where you at in N.C.?

Sponsored

 

[jeepers29]

I played hooky from work so I could take off the hardtop and finally install my half doors.

That looks awesome topless with half doors.

 

[BeachBuggy]

Where you at in N.C.?

Johnston County, I’ll be out your way camping in a few months.

 

[Chuck]

Installed a pair of Baja Designs lights on the rear bumper. Will get them wired up later this weekend.

Do those come with the insert, or is that something you fab’d up?

 

[jwilson2899]

That looks awesome topless with half doors.

Thanks, I’m really happy with them. I had to put the soft top on because we managed to get one nice day without cold or rain lol.

 

[BeachBuggy]

Do those come with the insert, or is that something you fab’d up?

Lights came pre mounted on the inserts. Simply unscrew the three screws holding the reflector in place and swap it with the lights.

got everything wired later this afternoon. Ran everything through the frame rail.

night time pics

 

[ospreyfe55]

Swapped out the factory track bar hardware for 9/16”x3” grade 8 bolts! What a difference in the feel.

 

[Gren71]

Swapped out the factory track bar hardware for 9/16”x3” grade 8 bolts! What a difference in the feel.

what bolts and bar is that? I was just today re centering my track bar and was wondering about better hardware

 

[DailyMoparGuy]

Swapped out the factory track bar hardware for 9/16”x3” grade 8 bolts! What a difference in the feel.

I saw a video about swapping these out to minimize wiggling. I’ll probably do the same.

 

[ospreyfe55]

what bolts and bar is that? I was just today re centering my track bar and was wondering about better hardware

It’s a MetalCloak track bar but the bolts are just grade 8 9/16” x 3” with 2 washers and a Lock nut. Bonus is the zinc matches the MetalCloak Zinc coating!

 

[Chuck]

Lights came pre mounted on the inserts. Simply unscrew the three screws holding the reflector in place and swap it with the lights.

got everything wired later this afternoon. Ran everything through the frame rail.

night time pics

Very nice! Look like they’ll light up the night

 

[Hootbro]

Swapped out the factory track bar hardware for 9/16”x3” grade 8 bolts! What a difference in the feel.

You have a straight rear track bar on your front?

 

[Frenzy]

Those could be my next set of tires. Can't wait to see them mounted.

Thanks! I will post when Phase 1 of my JT build is done, which will likely be in July. I'm in process of scraping up the funds, redefining Phase 2, and purchasing parts.

 

[Labswine]

Took off the freedom panels (winter mode) and put on my BestTop SunRunner (spring, summer, fall mode). ?

 

[rafaelsmith]

Took off the freedom panels (winter mode) and put on my BestTop SunRunner (spring, summer, fall mode). ?

Sunrider is perhaps the best thing I have gotten for the JT. I put mine on about 2 years ago and have never taken it off... 365/7 mode

Sponsored