NCJL
Well-Known Member
- First Name
- Dean
- Joined
- Jul 22, 2021
- Threads
- 33
- Messages
- 297
- Reaction score
- 366
- Location
- New Mexico
- Vehicle(s)
- JLURD
- Build Thread
- Link
- Occupation
- Electrical
- Thread starter
- #1
I’m either fortunate or unfortunate to have the experience of both. Trying to focus on fortunate.
The short answer is GDE Afterlife.
A little backstory (maybe a lot). 21 JTR, 42’s, 60/80 axles, 5.13 gears, coil over all 4 corners w/bypass front, long arm suspension. I’m heavy. Built with less than 1000 miles on it. Zero issues for about the first 10,000 miles. 40” tires the first 20k’ish. 42’s not available.
Side note. I have owned 9 Diesels, purchased new for personal and business use since ‘01. JTR is the 10th. Never considered any type of modifications related to engine/trans before. I’m a speed limit, maybe plus 5 driver. When towing, speed limit, maybe minus 10 driver.
Than the derate’s started. Christmas dash occurring several times. Over the next several thousand miles I cured this problem with heat wrapping wiring harness, oil cooler, etc….
Next was DPF codes. Dealer said need new DPF, take 3 months, you might have to pay 3k for it. This was based on experience with the codes (I don’t remember codes) and my extreme modifications. 2nd dealer basically the same.
Not liking any of those options. EOC was less expensive with no down time. I was driving 200 miles a day when this happened.
EOC did what they said. Didn’t have any of the communication problems that some report. Just a little patience is what is needed with them (48 hours was normal response time).
The trans tune was most noticeable, better. I asked for the cleanest most reliable.
The next problem was, I Believe due to heat soak, engine codes popping up after about 6 hours of wheeling. No issues on the highway.
I’ve never been stranded by the Jeep. Well except for the alternator going out.
Fast forward many many thousand miles. Me itching for Moab, Rubicon type adventures the wife says not until we can do at least a one day trip in the forest without an engine code popping up. I can’t really disagree with idea. Although I did. This no engine code idea still hasn’t happened, nor Moab or the Rubicon.
During the many many miles era. I installed a high flow diesel cat to help with the exhaust fumes.
Several weeks back I qualified for the GDE afterlife tune. Than a few weeks back I got an emissions related engine code(possibly the cat). Didn’t want to spend the money. However the current set up wasn’t working.
GDE Afterlife tune has only been installed for a week. The difference so far is night and day. I thought the EOC was good. The GDE makes it look bad.
The description on GDE website is perfect. Once driven the description makes even more sense. I’m feeling like this will solve the remaining heat soak issue. Time will tell. A few trips to the mountains in the next few weeks are planned.
I also went with 190 t-stat. So far it is cooler during normal driving. I did a short grade for testing….not a huge difference. Maybe 5 degrees less.
The short answer is GDE Afterlife.
A little backstory (maybe a lot). 21 JTR, 42’s, 60/80 axles, 5.13 gears, coil over all 4 corners w/bypass front, long arm suspension. I’m heavy. Built with less than 1000 miles on it. Zero issues for about the first 10,000 miles. 40” tires the first 20k’ish. 42’s not available.
Side note. I have owned 9 Diesels, purchased new for personal and business use since ‘01. JTR is the 10th. Never considered any type of modifications related to engine/trans before. I’m a speed limit, maybe plus 5 driver. When towing, speed limit, maybe minus 10 driver.
Than the derate’s started. Christmas dash occurring several times. Over the next several thousand miles I cured this problem with heat wrapping wiring harness, oil cooler, etc….
Next was DPF codes. Dealer said need new DPF, take 3 months, you might have to pay 3k for it. This was based on experience with the codes (I don’t remember codes) and my extreme modifications. 2nd dealer basically the same.
Not liking any of those options. EOC was less expensive with no down time. I was driving 200 miles a day when this happened.
EOC did what they said. Didn’t have any of the communication problems that some report. Just a little patience is what is needed with them (48 hours was normal response time).
The trans tune was most noticeable, better. I asked for the cleanest most reliable.
The next problem was, I Believe due to heat soak, engine codes popping up after about 6 hours of wheeling. No issues on the highway.
I’ve never been stranded by the Jeep. Well except for the alternator going out.
Fast forward many many thousand miles. Me itching for Moab, Rubicon type adventures the wife says not until we can do at least a one day trip in the forest without an engine code popping up. I can’t really disagree with idea. Although I did. This no engine code idea still hasn’t happened, nor Moab or the Rubicon.
During the many many miles era. I installed a high flow diesel cat to help with the exhaust fumes.
Several weeks back I qualified for the GDE afterlife tune. Than a few weeks back I got an emissions related engine code(possibly the cat). Didn’t want to spend the money. However the current set up wasn’t working.
GDE Afterlife tune has only been installed for a week. The difference so far is night and day. I thought the EOC was good. The GDE makes it look bad.
The description on GDE website is perfect. Once driven the description makes even more sense. I’m feeling like this will solve the remaining heat soak issue. Time will tell. A few trips to the mountains in the next few weeks are planned.
I also went with 190 t-stat. So far it is cooler during normal driving. I did a short grade for testing….not a huge difference. Maybe 5 degrees less.
Sponsored