Looking for a unicorn phone mount. Any suggestions?

[Darkspeed]

get a magbak and stick the mag bar where ever you want.

https://magbak.com/

Sponsored

 

[MonkeySkunks]

get a magbak and stick the mag bar where ever you want.

https://magbak.com/

Was my 1st plan. They don't have a case for a Pixel 6 just the 6 Pro.

 

[Arcticelf]

The RAM mount systems work pretty well. I use one off the A pillar lower handle, but that violates two of the requirements you have.

 

[KSP938]

I have the magnet and it is awesome. This is on the second phone case. Holds very well even when gong thru the corn fields

 

[kevman65]

I have the Vector full width bar with 67 Designs bar clamps, arms, and device mounts for several items.
The only thing in line of sight through the windshield is my radar detector because it has to be. My Garmin GPS and phone are both below dash level.

I don't concern myself with "encroaching on passenger area" it's my truck after all.

 

[Plywood]

CMM grab bar mount with Ram ball. Use a Ram arm and attach that to Quadlock mount with quadlock phone case. Expensive setup but it’s absolutely the best. It doesn’t block any view at all as it sits in front of the A pillar. Very secure, won’t fall with doors off.

 

[CoachA]

iPhone 13 on a Bulletpoint mount

 

[KSP938]

I have the magnet and it is awesome. This is on the second phone case. Holds very well even when gong thru the corn fields

The best thing about the course motorsports mounts are when they aren't being used there isn't a huge gawdy bracket hanging down blocking everything.

 

[Free2roam]

This one looks like it will fit the bill

 

[BlueScapegoat]

What I did. Still like it

 

[Vtur]

CMM grab bar mount with Ram ball. Use a Ram arm and attach that to Quadlock mount with quadlock phone case. Expensive setup but it’s absolutely the best. It doesn’t block any view at all as it sits in front of the A pillar. Very secure, won’t fall with doors off.

I have the wireless setup, but with a custom made mounting bracket in the same place. The only location that doesn't obstruct any view and visor imo.

 

[Plywood]

I have the wireless setup, but with a custom made mounting bracket in the same place. The only location that doesn't obstruct any view and visor imo.

Is that mount screwed directly into the plastic cover?

 

[Vtur]

Is that mount screwed directly into the plastic cover?

Yeah. Screws and nuts through just the cap. Plus a smaller screw to lock the locking tab in place

 

[Jeepmonster]

This is what I did. A DIY combo of stage truss clamp, Ram arm, and wireless charger (use any mount that uses ball/socket mount).
https://www.jeepgladiatorforum.com/forum/threads/iphone-car-mount.58631/post-965335

 

[MonkeySkunks]

This is what I did. A DIY combo of stage truss clamp, Ram arm, and wireless charger (use any mount that uses ball/socket mount).
https://www.jeepgladiatorforum.com/forum/threads/iphone-car-mount.58631/post-965335

Saw that in the thread the other day. I like it other than being mounted on the shifter. Thinking I could achieve similar location by coming up from the side of the center stack or out from the kick panel.

Sponsored