My OEM Front Trail Cam install thread

[Phishs]

Yes.

Wont work with the 7"?

Sponsored

 

[ecidiego]

.

 

[ecidiego]

.

 

[The Duck of Earl]

It appears the front trail cam can only be optioned on the Rubi and Mojave if I am to believe the configurator?

Also, for whatever reason, the configurator won't let you add both the gloss back grill and the trail cam. I would assume there would be no reason you could not just buy the gloss black grill later (since between the two adding the trail cam later seems to be a real PITA)?

 

[ecidiego]

.

 

[ecidiego]

I see it available on:

Overland
Mojave
Rubicon
High Altitude

It's going to be something with "we don't want to install one of the Front Trailcam body harnesses on a Sport, because that harness has a bunch of wiring a Sport doesn't need for other options."

My guess.

 

[The White Rabbit]

So adding a forward facing cam is less complicated on a Mojave?

 

[FrankFrqnkFrank]

Following

 

[WK2JT]

All parts are in. Here are the major items... grill, both cameras, and CVPM. Here we go soon.....

View attachment 229859

So you will probably need the washer hose from the pump to the grill hose (see screenshot) and the jumper harness (see Jimmy’s parts list) for the Trailcam, otherwise your washer inputs will be backwards (cam washer soft key will run hood nozzles and wiper stock will run the Trailcam nozzle).

 

[ecidiego]

So you will probably need the washer hose from the pump to the grill hose (see screenshot) and the jumper harness (see Jimmy’s parts list) for the Trailcam, otherwise your washer inputs will be backwards (cam washer soft key will run hood nozzles and wiper stock will run the Trailcam nozzle).

Yep, I got everything off Jimmy's bill of materials...but that part # isn't in it?

Jumper harness meaning where? I have his CVPM harness with the power wire and CAN bus connector...

 

[ecidiego]

So adding a forward facing cam is less complicated on a Mojave?

No. It's the same regardless of model.

 

[ecidiego]

Nevermind, in his parts list he mentioned the jumper harness being a different part # but then says it isn't need because the wiring is the same?

 

[WK2JT]

Nevermind, in his parts list he mentioned the jumper harness being a different part # but then says it isn't need because the wiring is the same?

But it is needed after a review of the schematic by Jimmy. The washer hose segment wasn’t in the list. Those are the only two updates I ran into. Everything else is good to go

 

[ecidiego]

.

 

[ecidiego]

But it is needed after a review of the schematic by Jimmy. The washer hose segment wasn’t in the list. Those are the only two updates I ran into. Everything else is good to go

Got it thanks. He just told me to reverse the wires. I have a large depinning set. I'll take a look tomorrow and see if it is worth the trouble. Thanks for the help!

Sponsored