What did you do WITH your Gladiator today?

[Tonopah01]

This thread is costing me money. I ordered the tailgate step from Dale's and it's on its way

Sponsored

 

[Proximo]

This thread is costing me money. I ordered the tailgate step from Dale's and it's on its way

Get used to it

 

[TTEChris]

Installed a @JcrOffroad halfrack.

 

[sbetts]

Today was about finding a way to get the doors off without the hinges causing scratches. There may be better ways to do this, but this was quick and easy and worked really well for us! I think this might be the ONLY mod done on the Jeep that was free!

 

[Joker4L]

Don't trust the dash reads. Use a tire gauge. My dash reads are all off, from 31- 46. Gauge reads 34 on all 4.

I set my tires to 30.1 psi on each and dash read 32. I say mine are off maybe 2psi Max. It’s actually a good thing cause it prevents me from having to get a flat tire warning with my current tire pressure setting lol

 

[Proximo]

I set my tires to 30.1 psi on each and dash read 32. I say mine are off maybe 2psi Max. It’s actually a good thing cause it prevents me from having to get a flat tire warning with my current tire pressure setting lol

Had that in my JK. Annoying lil light

 

[JP1]

I get them within a tenth cold, there's a pound or so variation on screen, but pretty damn close.

 

[DirtyD]

Go Rhino Dominator D6 Rail Steps!

Looks awesome, these have been in my "wishlist" for a month or so now. Where did you get yours?

 

[Troybilt]

Today was about finding a way to get the doors off without the hinges causing scratches. There may be better ways to do this, but this was quick and easy and worked really well for us! I think this might be the ONLY mod done on the Jeep that was free! ]

This is the main reason I sucked the door catches into the doors never to be seen again.

 

[sodak]

Mopar 2" lift and 37" tires

 

[DMC1]

Installed my Warrior Products 8410 bed rack. I originally bought this for my Tacoma. When I sold the Tacoma I kept the rack. Had it posted and thought it was sold. Guy backs out at last minute. Went to my shop this morning and sat down. Looked at rack and tried it. It fits like a glove in the JT rail system and even used the same holes I used for the Tacoma. I'm glad the sale fell through!

 

[P90Ed]

Installed my Bestop Sunrider “Twill” . The mods continue!!!

Quick question: would going back to the Freedom Panels require a lot? I love the Sunrider for Spring/Summer/Fall but thinking of replacing the Freedom top for winter months. Great looking Gladiator - love the color. (still thinking about the Sunrider - haven't pulled the trigger yet.)

 

[Mowat]

Quick question: would going back to the Freedom Panels require a lot? I love the Sunrider for Spring/Summer/Fall but thinking of replacing the Freedom top for winter months. Great looking Gladiator - love the color. (still thinking about the Sunrider - haven't pulled the trigger yet.)

Nope.. it's 6 bolts.. 2 on each side and 2 in the middle and it comes off in 1 piece.. About 10 mins including pulling the freedom panels back out of the bag

 

[SleepyJeep]

I installed my @BuiltRight front panel and had to re-arrange stuff late last night. Going to Jeep Camp in Crivitz Wisconsin on October 11th. Still time to register before October 6th deadline, see the link in my signature.

I probably don't need to cramb everything tight on my rack, but i'm going to for max efficiency. Might need to move the m18 chainsaw back as the bar is inside the handle of the shovel. I put the shovel there because the filler neck buldge isn't shovel handle rated. More space on passenger side rear of box.

I flipped the axe head up because it can fit behind the shovel to give more room below shovel. Thinking that's where my sawhorse rubber bumps and straps will go.

The quickfist mini quick grips the shovel and axe use stick out too far to keep the PLYWOOD RATING for Gladys if they're on the sides. but on the backwall if I remove everything from the racks, but leave the mounts its still RATED FOR PLY I believe. For the few times a year I need to haul Plywood I don't mind taking everything off the racks, but taking those mounts off is a PITA!
The racks look bare now, NEED MORE STUFF!

everything fits nicely under the tonneau.

@steffen707 I just got the Front Panel in the mail. It didn't come with any screws or bolts... Do we use what is already there or how did you install yours?

 

[jrf]

Started with the small mods. Removed badges and replaced with our own preferences! Let the Jeep addiction officially begin!

Love those wheels

Sponsored