What did you do WITH your Gladiator today?

[Joker4L]

Nope.. it's 6 bolts.. 2 on each side and 2 in the middle and it comes off in 1 piece.. About 10 mins including pulling the freedom panels back out of the bag

yeah what he said. Took me all of 10 mins to install and would be just as fast to uninstall

Sponsored

 

[steffen707]

@steffen707 I just got the Front Panel in the mail. It didn't come with any screws or bolts... Do we use what is already there or how did you install yours?

Yours should have come with the bolts and those big nuts to attach to rail. Mine did, but I just used screws to attach to my wood rail.

Use the Allen bolts to screw through the rack into the threaded middle section loosely. Once D rings back on, tighten the Allen bolts.

That's what I did anyway.

Use the JT tool with big torx to loosen the rear tie down D rings.

 

[SleepyJeep]

Yours should have come with the bolts and those big nuts to attach to rail. Mine did, but I just used screws to attach to my wood rail.

Use the Allen bolts to screw through the rack into the threaded middle section loosely. Once D rings back on, tighten the Allen bolts.

That's what I did anyway.

Use the JT tool with big torx to loosen the rear tie down D rings.

I didn't get any bolts or screws... I guess I need to contact @BuiltRight

 

[G_S]

The rims got finished powder coating.
And brought it home to for the first time!!!

I might not can drive, it but Damn, it looks in the garage

 

[steffen707]

Pulled over on the highway to adjust the bulbs, had conflicting info online and youtube if cw or ccw was up or down. Turns out I was adjusting the bulbs above the street signs at dusk, lmao. So I just kept the lights off until I found a wall. I finally found this garbage dumpster shed thing by a bank.

25 foot away from wall, 3 feet up is where I'm at now, much better. Not flashed once this weekend.

 

[DHP]

Added a Line-X bed liner, trail rail system, and Rugged Ridge Hard Rolling bed cover this week. Happy with the results

 

[Texas_Gladiator]

Pulled over on the highway to adjust the bulbs, had conflicting info online and youtube if cw or ccw was up or down. Turns out I was adjusting the bulbs above the street signs at dusk, lmao. So I just kept the lights off until I found a wall. I finally found this garbage dumpster shed thing by a bank.

25 foot away from wall, 3 feet up is where I'm at now, much better. Not flashed once this weekend.

I gotta do that this weekend sometime. So which is it to lower? CW or CCW?

 

[Runkrod]

This is something I hope comes out! so cool. and if it works with cover great! very cool!

• ›

Image Unavailable
Image not available for
Color:

• 
• 

Tyger Auto TG-SB7D88258 Sport Compatible with 2002-2018 Dodge 1500/2500/3500 (Without Ram Box) 6.5 and 8ft Bed (inclu 2019 Classic) Fleet Body Side | Textured Black | Light Mount | Roll Bar

This is something I never knew I always wanted!!!

 

[Lex Low]

Put my DT-1’s with Ridge Grapplers on today. Tough doing by yourself

Those look amazing Doc.

Do you have a picture from the back. Want to see what the offset looks like.

 

[Mowat]

This is something I never knew I always wanted!!!

A bunch of us want these Or something similar but nobody is making them.

 

[Moab]

Installed my cowl / A-pillar lights.
Fellow Jeeper Mr_Bill advised on wiring hookup for Aux switch.

 

[919Jeep]

Picked up my Sport S from Tri-City on Thursday evening.

First things first, Rubicon take off wheels and tires and a stubby antenna...

Took off the air dams today; figured that would be about a 20 minute job. Reader, it was not. Approximately 83 bolts in each one, most of them in hard to reach places, all of them 10 times longer than they need to be. Looks much better though...

Now I just need to figure out which rock rails/side steps to buy

 

[DirtyD]

Installed my cowl / A-pillar lights.
Fellow Jeeper Mr_Bill advised on wiring hookup for Aux switch.

Who makes those brackets?

 

[steffen707]

I gotta do that this weekend sometime. So which is it to lower? CW or CCW?

LMAO, I already forgot.

If you park in front of a wall it's really easy, just keep track of how many rotations you do if you wanna lower each side the same.

 

[Slickxp]

I have been busy adding goodies to Garfield.
Day 1 :
Tazer Mini
Pulsar

Day 2:
Rough Country Nerf Steps
Magnum Force Stage-2 For Air Intake
13" Antenna

Day 3:
Wheel: Fuel Cleaver 20" x 12" -44
Tires: Nitto Ridge Grapper 35" x 13.5
3.5" Rough Country lift kit

Day 4:
Alignment

Sponsored