My OEM Front Trail Cam install thread

[ecidiego]

Ok, mines very different.
The wiring is taped into the main loom just after the motor plug.
Does swapping the two pins in the pump connector on the current loom do the same thing?

On a Murican Jeep, yes. I don't know what weird magic happens down undah! =D

Sponsored

 

[RustyC]

On a Murican Jeep, yes. I don't know what weird magic happens down undah! =D

Wish me luck then!
This is how the new pump sits, the camera hose will only reach the black outlet, but it looks like the windscreen line also wants to connect there.
Can you confirm which colour is for the camera?

 

[ecidiego]

I don't even understand the orientation of what I'm looking at.....

Is this a view with a fender liner removed what side of the truck is it?

nothing like my 3.6

 

[Alc]

@ecidiego saw you ask the question on the wrangler forum about the CVPM somewhere beneath the center console…find a diagram anywhere? I’ve been searching with no luck.

 

[RustyC]

I don't even understand the orientation of what I'm looking at.....

Is this a view with a fender liner removed what side of the truck is it?

nothing like my 3.6

Yep, fender lining removed, your driver side, my passenger side
Black outlet pointing to front of car, white outlet pointing towards cab
Do you know if the black or the white outlet is supposed to feed the camera?

 

[ecidiego]

.

 

[RustyC]

White outlet to white elbow = camera.

View attachment 352940

OK, mine won't reach the white outlet, however I assume that swapping pins in the plug, is the same as swapping hoses at the outlets, so in theory I should be able to reverse the hoses, but leaver the current plug as is, rather than reversing the pins.
Does that make sense?

 

[ecidiego]

test it before reassembly...youll need to do the alfaobd work tho for the pump settings.

 

[ecidiego]

What baffles me is why Jeep reverses the pins in the first place they can obviously drive the signal positive negative both ways. who knows....

 

[RustyC]

test it before reassembly...youll need to do the alfaobd work tho for the pump settings.

That’s what I was thinking, if not, I’ll swap pins and extend the camera hose
Also, is this the correct CAN port for the video module?
It’s behind my glovebox

 

[ecidiego]

That’s what I was thinking, if not, I’ll swap pins and extend the camera hose
Also, is this the correct CAN port for the video module?
It’s behind my glovebox

Defer to @Jimmy07 there....I do believe he indicated it is though. Maybe @DailyDrivenTJ can confirm

 

[DailyDrivenTJ]

Edit:

White bank is the correct one to plug CVPM connector into.


=============================
Green bus bank on the right is the CAN bus.

@RustyC What options do you have and what year? You seemed to have another row.

 

[Jimmy07]

That’s what I was thinking, if not, I’ll swap pins and extend the camera hose
Also, is this the correct CAN port for the video module?
It’s behind my glovebox

The white junction block on the left in that picture is the correct bus for the CVPM, not the green one on the right.

 

[RustyC]

The white junction block on the left in that picture is the correct bus for the CVPM, not the green one on the right.

Thanks mate, that’s what I thought.
And it doesn’t matter which port correct?

 

[Jimmy07]

Thanks mate, that’s what I thought.
And it doesn’t matter which port correct?

Correct, any empty spot.

Sponsored