Looks like it fits great, without any gaps. Thanks for the pic! I may have to get one of theseInstalled a Bushwacker Stone Guard (Part No. 14093). Texture/finish match nicely with the fenders. Standard double sided tape, so no drilling or bolts required.
Thanks. Just to clarify, not a question for a Rubicon because of the higher lift? Was planning on 35’s with no addl lift on my Rubicon.
It was more to do with axles and lockers - which rubi has - Are you going to use steel wheel and a matching tire or just keep the stock spare - which would be usable but not optimal
Got it. I was questioning putting a 35 on the steel wheel instead of buying a 5th wheel, but really only if there would be good reason not to put a nice wheel under the bed since it would likely have a different offset.
Not worth a fancy spare wheel unless you are planning to do 5-tire rotations to extend the life of the set.
Agreed. I went with the factory steel wheel and found a used 35 to throw on it.
![Jeep Gladiator What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK] IMG_20191120_092831](https://cdn.jeepgladiatorforum.com/attachments/46/46657-74da10991b11899570887732aaf6aaf7.webp)
![Jeep Gladiator What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK] 3TEvhPK](https://cdn.jeepgladiatorforum.com/attachments/46/46685-1cc7a0a4f0749dd7f6582887438eec9b.webp)
![Jeep Gladiator What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK] 20191119_164447](https://cdn.jeepgladiatorforum.com/attachments/46/46690-9ff194a2224835df2867132b9ddfa145.jpg)
![Jeep Gladiator What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK] 20191120_085156](https://cdn.jeepgladiatorforum.com/attachments/46/46692-cdb2f32c620bfd92c77efb355ea483ab.jpg)
![Jeep Gladiator What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK] 20191119_165942](https://cdn.jeepgladiatorforum.com/attachments/46/46693-b22567710dff39b5c578d5aadfaa8308.webp)
I want a grill mesh with the punisher logo but I don’t know how to get it to work with my trail camera. How did you get it to work ?Figured out the cuts for the factory insert so I don’t have to cut the actual insert if people have the trail cam.
Demon eyes and under glow / rocklights were last weeks mod.
Mine is also coming in with the Mopar hard cover.Researched a ton of tonneau covers...Rough Country, Rugged Ridge, Weathertech...ultimately went with the Mopar tri-fold hard tonneau and couldn’t be happier with the fit and finish, top quality product/materials and I paid $850 including free shipping via eBay.
Oh and for the record, torx head screws can go F off, what an absolute PAIN messing with 4 bolts that should screw in under 2 minutes that ended up taking a good 30 minutes of frustrating attempts to line up the allen wrench in the torx head and fumble with 1/4 turns...pretty sure that allen wrench is now orbiting the earth after I chucked it out of the garage once I tightened the last one
![Jeep Gladiator What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK] 20191107_121341](https://cdn.jeepgladiatorforum.com/attachments/46/46739-f15673ce3c4e7f42192be061e3c4aff6.jpg)
I’d like to see the whole installation including the radio along with recommendations on choice of radios. ThanksAdded the Topsy Products NMO mount for my ham radio antenna. Put down some 3M body tape so nothing happens to the fender. Next step is running the antenna coax and power inside the cab. This mount is perfect.
Where did you source the step? Thanks.Installed my tailgate step today. Fairly easy install, great heavy duty construction, and makes it a lot easier to step up into the bed.
