What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[SnazzGlad]

New wheels on the Falken 285/70’s. +12 offset. Glad I didn’t go -12. Took a couple weeks of talking myself out of going bigger on the tires. Glad I stayed with the 33’s. I really need to do something about the silver around the fog lights . Looks way worse with the bronze wheels

Sponsored

 

[Hootbro]

New wheels on the Falken 285/70’s. +12 offset. Glad I didn’t go -12. Took a couple weeks of talking myself out of going bigger on the tires. Glad I stayed with the 33’s. I really need to do something about the silver around the fog lights . Looks way worse with the bronze wheels

Bronze/Gold wheels look good on that color.

 

[MyRight]

Installed the Tyger bull bar.

I had to remove my steel skid plate, as the ends protrude too far to accommodate.
I will be cutting the ends off of the skid plate so it will fit between the mounting points.

 

[Blue Ridge]

After a year of ownership, finally got rid of the plastic bumpers and replaced them with Metalcloak steel. And got a winch. And rear quarter rockers. And some KC LEDs. I might get some outboard air but this Jeep now has almost everything on my initial wish list. And even my 6 months into owning it wish list. D ring shackles are more green that I thought they'd be, so may take a rattle can to them at some point. And might go up a touch in tire size when these wear out, but I'm really close to done spending money on it, and I'm very happy with everything.

 

[doc-ketamine]

Metalcloak steel…

Looks amazing!!!!

 

[Blue Ridge]

Thanks! I love this truck like a joke about a country song. Signing up for the Jeep adventure academy in Uwharrie if schedule allows and doesn't interfere with turkey season.

 

[sass JT]

After a year of ownership, finally got rid of the plastic bumpers and replaced them with Metalcloak steel. And got a winch. And rear quarter rockers. And some KC LEDs. I might get some outboard air but this Jeep now has almost everything on my initial wish list. And even my 6 months into owning it wish list. D ring shackles are more green that I thought they'd be, so may take a rattle can to them at some point. And might go up a touch in tire size when these wear out, but I'm really close to done spending money on it, and I'm very happy with everything.

Dammz looking good! Love the front bumper but the rear is sexy! Lol

Did the license plate light come with the rear???

 

[Nacho]

Put some new shoes on the Overland.. LT285/75-18R(35s) Nitto Ridge Grapplers.. Stock rims and stock height.

 

[Blue Ridge]

Dammz looking good! Love the front bumper but the rear is sexy! Lol

Did the license plate light come with the rear???

It does. I expected it to reuse the factory light, but they have one already installed in there. I had so badly wanted a Mopar bumper, but I wouldn't swap for those now. Metalcloaks are really well-made and the the rear rockers are a perfect fit.

 

[bailer]

Picked up my truck from Suntek ppf. Super happy with the job! I did the grill, hood, windshield frame, fenders, rockers up to the lower hinge, and tailgate from the top down to bottom of the handle/latch.
The truck is granite crystal, so I think this will prevent scratches etc.

 

[the_visiting_fireman]

Worked on my GMRS radio install. KG-1000G chassis mounted under steering wheel where factory 110V inverter would go, and control panel remotely mounted overhead.

hopefully finish wiring next weekend.

Is that a custom overhead mount for the control panel or is that something you found? I've been racking my brains trying to find something that gets a radio head unit up off the dash, and I'd rather not use the tray on the dash for it!

 

[JTzntz]

Is that a custom overhead mount for the control panel or is that something you found? I've been racking my brains trying to find something that gets a radio head unit up off the dash, and I'd rather not use the tray on the dash for it!

@the_visiting_fireman , it’s a Trigger 6-shooter overhead mount for the JL/JT.

https://triggercontroller.com/product/trigger-6-shooter-remote-mount/

I just made an Abs mounting plate for the front since it doesn’t come with a solid front surface and the he controls panel of the KG-1000G is slightly smaller than the mount.

I didn’t want to install a cross bar or molle panel for it, and block the view with the top off.

 

[20GobiGladi]

Got the windows tinted and added tinted back window for the soft top.

 

[Geoarch]

295/70/R18 in Cooper Discoverer AT3 XLT. Got a bunch more pics in my vehicle showcase if you want to check out. Love them by the way.

Beautiful. I just ordered the 305/17-17s on ION wheels with zero offset. What's the offset on your wheels? I just ordered a white Rubicon. It's like the color opposite.

 

[texanjeeper]

Teraflex 1.5 inch spacer kit. Yeah, I know, I'm the guy who started the philistine thread, but it was obvious that I wasn't going to fit 35's properly unless I got the front end leveled off. So, I did the deed.

Sponsored